| Content |
DESCRIPTION:
Tactical MOLLE panel for use on the front or rear of car seats to attach various equipment, pouches, holsters, etc. The panel can be used both horizontally (rear seat) and vertically (front seat). The panel can be quickly removed from the vehicle with all attachments and used. Part of the TacVec series.
FEATURES:
- MOLLE panel to use on back of car seats
- Panel can be used both vertically (front seat) and horizontally (rear seat)
- Modular hook-and-loop pouches can also be attached
- Quick removal from the vehicle with all attachments
- Three fastening straps included
- Side release buckles
- MOLLE hook-and-loop-system
Product Videos
WEIGHT
23oz | 650g
DIMENSIONS
21.5 x 14.75in | 55 x 37.5cm
MATERIAL
CORDURA® 700 den
TECHNOLOGY
FABRIC
| Use the charging C360 Free Machining Brass ( Buttery Smooth ) head to charge the light and you're all set to keep on trekking.
Can be charged from work, home, laptop, USB Battery pack....
Specifications:
- Length: 1.6" Diameter: .74" Weight: 27.8 Grams - No Battery
- Battery weight 9 Grams
- Comes with extra o-rings
- LED Type: Cree XP-G2 S4 with a life span up to 50,000 hours. ( Newest & Brightest Emitter )
- Orange Peel Reflector for a smooth even beam
- Recharge Time is 30-100 minutes - depending on charge rate source
- The reflector is aluminum alloy.
- Flashlight body is made of C360 Free Machining Brass ( Buttery Smooth )
- Battery is 14250 Lithium Cell 280mAh
- The lens has been treated with a AR (Anti-Reflective) coating.
- Its proprietary circuit design features reverse polarity protection and runs off of one 14250 battery that provides 2 levels of brightness (Low / High).
- Twist on for Low
- Twist 1/2 turn more for High
Using a single 14250 battery we got the following results:
-
Low mode, 15 lumens output for up to 9 hours
-
High mode, 305 lumens output for up to 40 minutes
Includes Complete Kit:
1x Lithium Rechargable Battery
1x USB Charging Cable
1x Charging SS Head With Charge indicator
1x PCL Light C360 Solid Brass Head & Body
4x Spare O-Rings | This item has a bit of mystery around it. The original government use for it is unknown. Keep one in your car, home and work. Brand new, never used, overrun from government contract.
What will you use your A/B Cache for?
Possible uses include:
- Geo-Caching
- Pet Identification
- Emergency Cash Stash
- Water Purification Tablets
- Pill Storage.
- Jacket Zipper Pull
Specification Brass:
- C360 Free Machining Brass ( Buttery Smooth )
- Overall Length: 56.5mm or 2.225"
- External Diameter: 16mm or .63"
- Internal Opening: 11.4mm or .45"
- Internal Depth Side A : 16mm or .63"
- Internal Depth Side B : 18mm or .71"
- Weight 1.7 ounces or 49 Grams
- Lid is secured via flange to cap seal (Internal o-ring)
- U.S. Made
Use responsibly and due to the nature of this item, it is not returnable for obvious sanitation reasons.
Always wash your container with hot water and mild soap for ensured sanitation. | Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, this was offered as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from government order.
| The possibilities are endless of what this tool can carry! AA battery, geo-caching, pet identification, emergency cash stash, water purification tablets storm proof matches, cotton balls for fire starting, pills, needle, thread, etc. One side of the Tube-A-Ton is a battery locker which fits AA batteries perfectly. Brand new, never used overrun from government contract. Each side has a tight o-ring seal to prevent exposure to moisture in the toughest conditions. Has large loop hole for attaching lanyards and split rings for EDC (Every Day Carry).
Tube-A-Ton fits a AA on each side !
The possibilities are endless!
TITANIUM MODEL SPECS
Overall length: 159.00 mm or 6.17
External diameter: 19.00 mm or .75"
Internal opening: 14.45 mm or .57"
Internal depth: 49.00 mm or 1.95" & 69.2 mm or 2.72"
Lid is secured via flange to cap seal (internal o-ring)
Titanium : 6AL-4V
Weight :102.5 Grams
| (US Government Model)
NSN: 3740-01-474-7377
When Uncle Sam wanted tweezers for tick and splinter removal, these are the ones they chose.
What makes these so special: Most tweezers are made by spot-welding two pieces of metal together, These tweezers are crafted from a single piece of spring tempered stainless steel or spring titanium.The wide hinge area assures perfect alignment, and the points are hand dressed to exacting specifications. The included tip protector also provides for easy carrying on your key ring or hanging next to your dog tags.
Countless Other Uses:
- Tick removal, home, garden, kitchen, bath, shop, auto, boat, tool box, first aid, hobbies, arts & crafts, fishing, sewing, needlework, removing stitches, hair removal, cosmetics, desk, school, office, pocket/purse, laboratory & medical instrument, splinter & sliver removal
Stainless Steel and Black Passivated Stainless Steel:
Most tweezers are made by spot-welding two pieces of metal together, These tweezers are crafted from a single piece of spring tempered stainless steel.
Specs:
- 2.5" x 0.5" x 0.25"
- (6.3 cm x 13 cm x 6 cm)
|
