Content |
DESCRIPTION:
Tactical MOLLE panel for use on the front or rear of car seats to attach various equipment, pouches, holsters, etc. The panel can be used both horizontally (rear seat) and vertically (front seat). The panel can be quickly removed from the vehicle with all attachments and used. Part of the TacVec series.
FEATURES:
- MOLLE panel to use on back of car seats
- Panel can be used both vertically (front seat) and horizontally (rear seat)
- Modular hook-and-loop pouches can also be attached
- Quick removal from the vehicle with all attachments
- Three fastening straps included
- Side release buckles
- MOLLE hook-and-loop-system
Product Videos
WEIGHT
23oz | 650g
DIMENSIONS
21.5 x 14.75in | 55 x 37.5cm
MATERIAL
CORDURA® 700 den
TECHNOLOGY
FABRIC
| (US Government Model)
NSN: 3740-01-474-7377
When Uncle Sam wanted tweezers for tick and splinter removal, these are the ones they chose.
What makes these so special: Most tweezers are made by spot-welding two pieces of metal together, These tweezers are crafted from a single piece of spring tempered stainless steel or spring titanium.The wide hinge area assures perfect alignment, and the points are hand dressed to exacting specifications. The included tip protector also provides for easy carrying on your key ring or hanging next to your dog tags.
Countless Other Uses:
- Tick removal, home, garden, kitchen, bath, shop, auto, boat, tool box, first aid, hobbies, arts & crafts, fishing, sewing, needlework, removing stitches, hair removal, cosmetics, desk, school, office, pocket/purse, laboratory & medical instrument, splinter & sliver removal
Stainless Steel and Black Passivated Stainless Steel:
Most tweezers are made by spot-welding two pieces of metal together, These tweezers are crafted from a single piece of spring tempered stainless steel.
Specs:
- 2.5" x 0.5" x 0.25"
- (6.3 cm x 13 cm x 6 cm)
| Use the charging C360 Free Machining Brass ( Buttery Smooth ) head to charge the light and you're all set to keep on trekking.
Can be charged from work, home, laptop, USB Battery pack....
Specifications:
- Length: 1.6" Diameter: .74" Weight: 27.8 Grams - No Battery
- Battery weight 9 Grams
- Comes with extra o-rings
- LED Type: Cree XP-G2 S4 with a life span up to 50,000 hours. ( Newest & Brightest Emitter )
- Orange Peel Reflector for a smooth even beam
- Recharge Time is 30-100 minutes - depending on charge rate source
- The reflector is aluminum alloy.
- Flashlight body is made of C360 Free Machining Brass ( Buttery Smooth )
- Battery is 14250 Lithium Cell 280mAh
- The lens has been treated with a AR (Anti-Reflective) coating.
- Its proprietary circuit design features reverse polarity protection and runs off of one 14250 battery that provides 2 levels of brightness (Low / High).
- Twist on for Low
- Twist 1/2 turn more for High
Using a single 14250 battery we got the following results:
-
Low mode, 15 lumens output for up to 9 hours
-
High mode, 305 lumens output for up to 40 minutes
Includes Complete Kit:
1x Lithium Rechargable Battery 1x USB Charging Cable 1x Charging SS Head With Charge indicator 1x PCL Light C360 Solid Brass Head & Body 4x Spare O-Rings | The Flat Gate Clip can be used to keep your everyday carry gear organized and ready for rapid deployment. The Flat Gate Clip is Water Jet cut and is truly made to last and can be used to carry any small preppers paraphernalia you may have.
Specifications:
Small 20 mm x 9.25mm x 3mm ( 3.2 Grams )
Medium 26mm x 12mm x 3mm ( 5.1 Grams )
Large 33mm x 15mm x 4 mm ( 7 Grams )
- Made from 300 series stainless steel
IMPORTANT : This is not a life safety device.
| Spare Steel Pocket Clip
This clip can be attached to a triple AAA flashlight, and can be easily clipped onto a hat, jeans, t-shirt, or anywhere else you have as a spot to carry your flashlight. | The Hults Bruk Torneo is a compact felling axe intended for bringing down or cutting up small to medium sized trees.
This item has an axe head weight of 1.75 Lbs and a handle length of 26 inches. The head is the product of blasted and clear-lacquered ironwork and the curved shaft is made of US-sourced hickory. That handle is treated with linseed oil.
- This axe head is hand-forged and made from Swedish axe steel in a foundry that has been in operation since 1697.
- As part of the production process, the steel is struck multiple times thereby increasing its density and resulting in more durability of the axe.
- The head is constructed in such a way that there is a tempered zone designed to hold a very sharp edge even after many sharpenings.
- Each axe comes with a traditional leather protective sheath that is embellished with some unique Swedish decorative elements. The axe is shipped in its own storage box and comes with a detailed users manual.
|