| Content | The Mammoth Multi Light is a versatile, rugged, and multifunctional workhorse that’s perfect for all the grease monkeys or outdoorsmen out there. Equipped with our rechargeable design, its always ready for you whether you recharge this beast with solar or direct power.
Its water resistant and the LED shines incredibly bright at 400 lumens. The juicy 4400 mAh lithium-ion battery can provide up 35 hours of light as a 150-lumen flashlight and up to 18 hours as an area light on one full charge (that same battery holds a charge for 7 years, so don't worry about putting it on the shelf).
You can also charge your mobile devices with the USB port. It features a Micro USB port for rapid charging or you can simply use any light source to keep your Mammoth charged through its built-in solar panel. Lastly, the Mammoth includes a built-in and retractable 110/220 wall plug for charging while at home.
The Mammoth also has a rotating magnetic base and a 120-degree “flex head” allowing total access for when you need light the most. This bad boy is 9” in length and 8.5 oz. | | The reflector glows after the light turns off so it's easy to find in the night.
Specifications:
- Length: 2.65"
- Diameter: .57"
- Stainless Steel Pocket Clip ( Easy to clip onto a hat, MOLLE gear or shirt pocket )
- Glow In the Dark Built In reflector ( Easy to find in the dark )
- LED Type: Cree G2 Emitter ( High Output ) with a life span up to 50,000 hours.
- Flashlight body is machined of solid billet C360 Free Machining Brass ( Buttery Smooth )
- Stainless Steel ring around the dome lens for added durability
- The dome lens has been treated with an AR (Anti-Reflective) coating.
- Proprietary circuit design features reverse polarity protection and runs off of one AAA battery that provides 3 levels of brightness ( Medium / Low/ High ).
Using a single Duracell AAA battery we got the following results:
- Low Mode, 5 lumen output for up to 60 Hours ( Diffused Light )
- Medium Mode, 48 lumen output for up to 4 Hours
- High Mode, 160 lumen output for up to 75 Minutes
| Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, this was offered as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from government order.
| This item has a bit of mystery around it. The original government use for it is unknown. Keep one in your car, home and work. Brand new, never used, overrun from government contract.
What will you use your A/B Cache for?
Possible uses include:
- Geo-Caching
- Pet Identification
- Emergency Cash Stash
- Water Purification Tablets
- Pill Storage.
- Jacket Zipper Pull
Specification Brass:
- C360 Free Machining Brass ( Buttery Smooth )
- Overall Length: 56.5mm or 2.225"
- External Diameter: 16mm or .63"
- Internal Opening: 11.4mm or .45"
- Internal Depth Side A : 16mm or .63"
- Internal Depth Side B : 18mm or .71"
- Weight 1.7 ounces or 49 Grams
- Lid is secured via flange to cap seal (Internal o-ring)
- U.S. Made
Use responsibly and due to the nature of this item, it is not returnable for obvious sanitation reasons.
Always wash your container with hot water and mild soap for ensured sanitation. | Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, we offered these as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from our government order.
|
