| Content | The Mammoth Multi Light is a versatile, rugged, and multifunctional workhorse that’s perfect for all the grease monkeys or outdoorsmen out there. Equipped with our rechargeable design, its always ready for you whether you recharge this beast with solar or direct power.
Its water resistant and the LED shines incredibly bright at 400 lumens. The juicy 4400 mAh lithium-ion battery can provide up 35 hours of light as a 150-lumen flashlight and up to 18 hours as an area light on one full charge (that same battery holds a charge for 7 years, so don't worry about putting it on the shelf).
You can also charge your mobile devices with the USB port. It features a Micro USB port for rapid charging or you can simply use any light source to keep your Mammoth charged through its built-in solar panel. Lastly, the Mammoth includes a built-in and retractable 110/220 wall plug for charging while at home.
The Mammoth also has a rotating magnetic base and a 120-degree “flex head” allowing total access for when you need light the most. This bad boy is 9” in length and 8.5 oz. | The Flat Gate Clip can be used to keep your everyday carry gear organized and ready for rapid deployment. The Flat Gate Clip is Water Jet cut and is truly made to last and can be used to carry any small preppers paraphernalia you may have.
Specifications:
Small 20 mm x 9.25mm x 3mm ( 3.2 Grams )
Medium 26mm x 12mm x 3mm ( 5.1 Grams )
Large 33mm x 15mm x 4 mm ( 7 Grams )
- Made from 300 series stainless steel
IMPORTANT : This is not a life safety device.
| The reflector glows after the light turns off so it's easy to find in the night.
Specifications:
- Length: 2.65"
- Diameter: .57"
- Stainless Steel Pocket Clip ( Easy to clip onto a hat, MOLLE gear or shirt pocket )
- Glow In the Dark Built In reflector ( Easy to find in the dark )
- LED Type: Cree G2 Emitter ( High Output ) with a life span up to 50,000 hours.
- Flashlight body is machined of solid billet C360 Free Machining Brass ( Buttery Smooth )
- Stainless Steel ring around the dome lens for added durability
- The dome lens has been treated with an AR (Anti-Reflective) coating.
- Proprietary circuit design features reverse polarity protection and runs off of one AAA battery that provides 3 levels of brightness ( Medium / Low/ High ).
Using a single Duracell AAA battery we got the following results:
- Low Mode, 5 lumen output for up to 60 Hours ( Diffused Light )
- Medium Mode, 48 lumen output for up to 4 Hours
- High Mode, 160 lumen output for up to 75 Minutes
| EOD Robotics developed this compact breaching tool with input from Bomb Techs, SWAT Operators and Patrol Officers. All these folks need a tool for prying, cutting, pounding, and with extra versatility for shutting off gas valves during emergencies.
Specifications:
- Made from 1045 high carbon steel and fully heat treated to a Rockwell hardness of over 45.
- The EOD Robotics Breacher Bar & CERT Bar come ready to go as a pry bar or lever. Ideal for opening crates and even punching through steel drums etc. The coffin corner back edge lends itself to a hammer nicely.
- The 2 inner holes in the handle can be for paracord or solid slabs or whatever you like. The hole towards the top of the blade and the one on the end are good for lashing it onto a shaft, tree branch etc. The end hole is geared for hanging it up or for attaching a lanyard so you do not lose it in that pit or in the water.
- The top edge can be hammered on as can the back end. And then you can use your imagination to do other things with it. (Makes a good wood chisel too!).
- Bars do not come with cord wrapped handles. You will receive the metal bar. The rest is up to you.
- Not pretty, but pretty handy. These were bulk packed for shipment to the military so they may have some rub marks where they have rubbed together in transit.
- Made in USA
Here's What Our Over-Protective Legal Department Has To Say:
Although the EOD Breacher Tool was developed and designed to enter the real world of urban combat, and with a little work with a file, belt sander, grinder, stone or a rock to it could be sharpened and converted to a Deadly stabbing or slashing instrument we can't recommend it. Likewise, the flat on the handle end should not be used as a skull or rib crusher or for performing other blunt trauma. Sorry these are not returnable. Be safe, and don't play with matches or run with scissors.
| (US Government Model)
NSN: 3740-01-474-7377
When Uncle Sam wanted tweezers for tick and splinter removal, these are the ones they chose.
What makes these so special: Most tweezers are made by spot-welding two pieces of metal together, These tweezers are crafted from a single piece of spring tempered stainless steel or spring titanium.The wide hinge area assures perfect alignment, and the points are hand dressed to exacting specifications. The included tip protector also provides for easy carrying on your key ring or hanging next to your dog tags.
Countless Other Uses:
- Tick removal, home, garden, kitchen, bath, shop, auto, boat, tool box, first aid, hobbies, arts & crafts, fishing, sewing, needlework, removing stitches, hair removal, cosmetics, desk, school, office, pocket/purse, laboratory & medical instrument, splinter & sliver removal
Stainless Steel and Black Passivated Stainless Steel:
Most tweezers are made by spot-welding two pieces of metal together, These tweezers are crafted from a single piece of spring tempered stainless steel.
Specs:
- 2.5" x 0.5" x 0.25"
- (6.3 cm x 13 cm x 6 cm)
| 385 Lumens!!! New even flow beam
Glow O-ring Around The Reflector ( easy to find in the dark )
Black Powder Coat Pocket Rotating Pocket Clip
The light is straightforward to use and has friendly ergonomics. The Maratac AAAx2 Extreme features an advance Cree XP-G2(R5) LED for greater brightness and efficiency.
- Medium 45 Lumens / Low 5 lumens / High 385 lumens mode brightness control (Simple 3 mode switching)
- Operation:
- Press and click the back thumb switch to turn on the light into Medium mode. Lightly press again for Low mode and once more for High. Press and click anytime to turn the light off.
SPECIFICATIONS:
- 22.8 grams or .8 oz (without battery)
- 5.0" O.A.L. x .58" inch width
- Type 3 Military Grade Anodizing ( Matte Finish )
- Utilizes 2 Standard AAA Batteries ( 1.2-1.7 Volts each )
- Standard Modes ( Pressing Tail Cap Through Modes )
-
- Medium ( 6 Hours )
- Low ( 90 hours )
- High ( 1.65 hours )
|
