CAVESTOCK

Free Standard Shipping for Orders Over $200. Learn More

Availability: In Stock

EOD Robotics Breacher Bar & CERT Bar – Breacher Bar

SKU: 6214372

$39.89

0 in stock

Categories: ,

Description

EOD Robotics developed this compact breaching tool with input from Bomb Techs, SWAT Operators and Patrol Officers. All these folks need a tool for prying, cutting, pounding, and with extra versatility for shutting off gas valves during emergencies. 

Specifications:

  • Made from 1045 high carbon steel and fully heat treated to a Rockwell hardness of over 45.
  • The EOD Robotics Breacher Bar & CERT Bar come ready to go as a pry bar or lever. Ideal for opening crates and even punching through steel drums etc. The coffin corner back edge lends itself to a hammer nicely.
  • The 2 inner holes in the handle can be for paracord or solid slabs or whatever you like. The hole towards the top of the blade and the one on the end are good for lashing it onto a shaft, tree branch etc. The end hole is geared for hanging it up or for attaching a lanyard so you do not lose it in that pit or in the water.
  • The top edge can be hammered on as can the back end. And then you can use your imagination to do other things with it. (Makes a good wood chisel too!).
  • Bars do not come with cord wrapped handles. You will receive the metal bar. The rest is up to you.
  • Not pretty, but pretty handy. These were bulk packed for shipment to the military so they may have some rub marks where they have rubbed together in transit.
  • Made in USA

Here’s What Our Over-Protective Legal Department Has To Say:
Although the EOD Breacher Tool was developed and designed to enter the real world of urban combat, and with a little work with a file, belt sander, grinder, stone or a rock to it could be sharpened and converted to a Deadly stabbing or slashing instrument we can’t recommend it. Likewise, the flat on the handle end should not be used as a skull or rib crusher or for performing other blunt trauma. Sorry these are not returnable. Be safe, and don’t play with matches or run with scissors.

Additional information

Weight 0.2267961848 kg
upc

Quick Comparison

SettingsEOD Robotics Breacher Bar & CERT Bar - Breacher Bar removeTick Tweezers removeMaratac Personal Carry Light Kit - Brass removeHults Bruk Aneby Hatchet removeFlat Gate Clips by Maratac Large / Stainless Steel removeBrass Peanut LED Flashlight Kit by Maratac remove
Image
SKU621437251144566414451614071264144632214453
Rating
Price$39.89$12.99$61.99$179.00$19.89$51.99
Stock

0 in stock

1 in stock

1 in stock

1 in stock

Availability0 in stock1 in stock1 in stock1 in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

EOD Robotics developed this compact breaching tool with input from Bomb Techs, SWAT Operators and Patrol Officers. All these folks need a tool for prying, cutting, pounding, and with extra versatility for shutting off gas valves during emergencies. 

Specifications:

  • Made from 1045 high carbon steel and fully heat treated to a Rockwell hardness of over 45.
  • The EOD Robotics Breacher Bar & CERT Bar come ready to go as a pry bar or lever. Ideal for opening crates and even punching through steel drums etc. The coffin corner back edge lends itself to a hammer nicely.
  • The 2 inner holes in the handle can be for paracord or solid slabs or whatever you like. The hole towards the top of the blade and the one on the end are good for lashing it onto a shaft, tree branch etc. The end hole is geared for hanging it up or for attaching a lanyard so you do not lose it in that pit or in the water.
  • The top edge can be hammered on as can the back end. And then you can use your imagination to do other things with it. (Makes a good wood chisel too!).
  • Bars do not come with cord wrapped handles. You will receive the metal bar. The rest is up to you.
  • Not pretty, but pretty handy. These were bulk packed for shipment to the military so they may have some rub marks where they have rubbed together in transit.
  • Made in USA

Here's What Our Over-Protective Legal Department Has To Say:
Although the EOD Breacher Tool was developed and designed to enter the real world of urban combat, and with a little work with a file, belt sander, grinder, stone or a rock to it could be sharpened and converted to a Deadly stabbing or slashing instrument we can't recommend it. Likewise, the flat on the handle end should not be used as a skull or rib crusher or for performing other blunt trauma. Sorry these are not returnable. Be safe, and don't play with matches or run with scissors.

(US Government Model)

NSN: 3740-01-474-7377 
When Uncle Sam wanted tweezers for tick and splinter removal, these are the ones they chose.

What makes these so special: Most tweezers are made by spot-welding two pieces of metal together, These tweezers are crafted from a single piece of spring tempered stainless steel or spring titanium.The wide hinge area assures perfect alignment, and the points are hand dressed to exacting specifications. The included tip protector also provides for easy carrying on your key ring or hanging next to your dog tags.

Countless Other Uses:

  • Tick removal, home, garden, kitchen, bath, shop, auto, boat, tool box, first aid, hobbies, arts & crafts, fishing, sewing, needlework, removing stitches, hair removal, cosmetics, desk, school, office, pocket/purse, laboratory & medical instrument, splinter & sliver removal

Stainless Steel and Black Passivated Stainless Steel:

Most tweezers are made by spot-welding two pieces of metal together, These tweezers are crafted from a single piece of spring tempered stainless steel. 

Specs:

  • 2.5" x 0.5" x 0.25"
  • (6.3 cm x 13 cm x 6 cm)

Use the charging C360 Free Machining Brass ( Buttery Smooth ) head to charge the light and you're all set to keep on trekking.

Can be charged from work, home, laptop, USB Battery pack....

Specifications: 

  • Length: 1.6" Diameter: .74" Weight: 27.8 Grams - No Battery 
  • Battery weight 9 Grams
  • Comes with extra o-rings
  • LED Type: Cree XP-G2 S4 with a life span up to 50,000 hours. ( Newest & Brightest Emitter )
  • Orange Peel Reflector for a smooth even beam
  • Recharge Time is 30-100 minutes - depending on charge rate source
  • The reflector is aluminum alloy.
  • Flashlight body is made of C360 Free Machining Brass ( Buttery Smooth )
  • Battery is 14250 Lithium Cell 280mAh
  • The lens has been treated with a AR (Anti-Reflective) coating.
  • Its proprietary circuit design features reverse polarity protection and runs off of one 14250 battery that provides 2 levels of brightness (Low / High).
    • Twist on for Low
    • Twist 1/2 turn more for High

Using a single 14250 battery we got the following results:

  • Low mode, 15 lumens output for up to 9 hours

  • High mode, 305 lumens output for up to 40 minutes

Includes Complete Kit:

1x Lithium Rechargable Battery
1x USB Charging Cable 
1x Charging SS Head With Charge indicator
1x PCL Light C360 Solid Brass Head & Body
4x Spare O-Rings

The Hults Bruk Aneby is a stout medium sized axe.

A great axe for camping or hunting designed to offer considerable power and leverage in a compact size. Ideally suited for light forest work, splitting smaller firewood and felling smaller sized trees. The Aneby can be comfortably used with one hand or both hands, and features a rounded poll for skinning. This item has an axe head weight of 2 Lbs and a handle length of 20 inches.

  • The axe head is hand-forged and made from Swedish axe steel in a foundry that has been in operation since 1697.
  • As part of the hand grinding production process, the steel is struck multiple times thereby increasing its density and resulting in more durability of the axe.
  • The head is constructed in such a way that there is a tempered zone designed to hold a very sharp edge even after many sharpenings.
  • The curved hickory handle is treated with linseed oil.
  • Each axe comes with a traditional leather protective sheath. (Replacement sheaths are available) The axe is shipped in its own storage box and comes with a detailed users manual.

The Flat Gate Clip can be used to keep your everyday carry gear organized and ready for rapid deployment. The Flat Gate Clip is Water Jet cut and is truly made to last and can be used to carry any small preppers paraphernalia you may have.

Specifications:

       Small 20 mm x 9.25mm x 3mm ( 3.2 Grams )
       Medium 26mm x 12mm x 3mm ( 5.1 Grams )
       Large 33mm x 15mm x 4 mm ( 7 Grams )

  • Made from 300 series stainless steel

 

IMPORTANT : This is not a life safety device.

Use the charging C360 Free Machining Brass ( Buttery Smooth ) head to charge the light and you're all set to keep on trekking.

Can be charged from work, home, laptop, USB Battery pack....

Specifications: 

  • Length: 1.29" Diameter: .52" Weight: 9.9 Grams 
  • Battery weight 3.4 Grams
  • Comes with extra o-rings
  • LED Type: Cree XP-G2 S4 with a life span up to 50,000 hours. ( Newest & Brightest Emitter )
  • Orange Peel Reflector for a smooth even beam
  • Recharge Time is 35-55 minutes 
  • The reflector is aluminum alloy.
  • Flashlight body is made of C360 Free Machining Brass ( Buttery Smooth )
  • Battery is 10180 Lithium Cell 70mAh
  • The lens has been treated with a AR (Anti-Reflective) coating.
  • Its proprietary circuit design features reverse polarity protection and runs off of one 10180 battery that provides 2 levels of brightness (Low / High).
    • Twist on for Low
    • Twist 1/2 turn more for High

Using a single 10180 battery we got the following results:

  • Low mode, 12 lumens output for up to 6 hours

  • High mode, 145 lumens output for up to 25 minutes

Includes Complete Kit:

1x Lithium Rechargable Battery
1x USB Charging Cable 
1x Charging SS Head With Charge indicator
1x Peanut Light C360 Solid Brass Head & Body
5x Spare O-Rings

Weight0.22679618480.02834952310.02834952311.247379016400.009922333085
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.2267961848 kg
upc

Weight 0.0283495231 kg
upc

Weight 0.0283495231 kg
upc

Weight 1.2473790164 kg
upc

upc

Weight 0.009922333085 kg
upc

You're viewing: EOD Robotics Breacher Bar & CERT Bar – Breacher Bar $39.89
Add to cart
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping
Shopping cart close