| Content | The Mammoth Multi Light is a versatile, rugged, and multifunctional workhorse that’s perfect for all the grease monkeys or outdoorsmen out there. Equipped with our rechargeable design, its always ready for you whether you recharge this beast with solar or direct power.
Its water resistant and the LED shines incredibly bright at 400 lumens. The juicy 4400 mAh lithium-ion battery can provide up 35 hours of light as a 150-lumen flashlight and up to 18 hours as an area light on one full charge (that same battery holds a charge for 7 years, so don't worry about putting it on the shelf).
You can also charge your mobile devices with the USB port. It features a Micro USB port for rapid charging or you can simply use any light source to keep your Mammoth charged through its built-in solar panel. Lastly, the Mammoth includes a built-in and retractable 110/220 wall plug for charging while at home.
The Mammoth also has a rotating magnetic base and a 120-degree “flex head” allowing total access for when you need light the most. This bad boy is 9” in length and 8.5 oz. | The reflector glows after the light turns off so it's easy to find in the night.
Specifications:
- Length: 2.65"
- Diameter: .57"
- Stainless Steel Pocket Clip ( Easy to clip onto a hat, MOLLE gear or shirt pocket )
- Glow In the Dark Built In reflector ( Easy to find in the dark )
- LED Type: Cree G2 Emitter ( High Output ) with a life span up to 50,000 hours.
- Flashlight body is machined of solid billet C360 Free Machining Brass ( Buttery Smooth )
- Stainless Steel ring around the dome lens for added durability
- The dome lens has been treated with an AR (Anti-Reflective) coating.
- Proprietary circuit design features reverse polarity protection and runs off of one AAA battery that provides 3 levels of brightness ( Medium / Low/ High ).
Using a single Duracell AAA battery we got the following results:
- Low Mode, 5 lumen output for up to 60 Hours ( Diffused Light )
- Medium Mode, 48 lumen output for up to 4 Hours
- High Mode, 160 lumen output for up to 75 Minutes
| Use the charging C360 Free Machining Brass ( Buttery Smooth ) head to charge the light and you're all set to keep on trekking.
Can be charged from work, home, laptop, USB Battery pack....
Specifications:
- Length: 1.6" Diameter: .74" Weight: 27.8 Grams - No Battery
- Battery weight 9 Grams
- Comes with extra o-rings
- LED Type: Cree XP-G2 S4 with a life span up to 50,000 hours. ( Newest & Brightest Emitter )
- Orange Peel Reflector for a smooth even beam
- Recharge Time is 30-100 minutes - depending on charge rate source
- The reflector is aluminum alloy.
- Flashlight body is made of C360 Free Machining Brass ( Buttery Smooth )
- Battery is 14250 Lithium Cell 280mAh
- The lens has been treated with a AR (Anti-Reflective) coating.
- Its proprietary circuit design features reverse polarity protection and runs off of one 14250 battery that provides 2 levels of brightness (Low / High).
- Twist on for Low
- Twist 1/2 turn more for High
Using a single 14250 battery we got the following results:
-
Low mode, 15 lumens output for up to 9 hours
-
High mode, 305 lumens output for up to 40 minutes
Includes Complete Kit:
1x Lithium Rechargable Battery
1x USB Charging Cable
1x Charging SS Head With Charge indicator
1x PCL Light C360 Solid Brass Head & Body
4x Spare O-Rings | Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, we offered these as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from our government order.
| Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, this was offered as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from government order.
| |
