| Content |
Description:
Modular Laser Cut MOLLE System universal combat backpack. The backpack has a lid pocket and laser-cut MOLLE on the sides and front. The front opening of the backpack pulls up completely. The insides have hook-and-loop sections for individual features. The hip fins are detachable. Comes with three hook-and-loop fastening accessories pouches and a hook-and-loop weapon holster.
Weight of empty backpack 58oz | 1.65kg
Weight of backpack including accessories 69oz | 1.95kg
Features:
- Padded Back Carrying System
- Length adjustable shoulder straps
- Detachable padded hip fins with zipped pockets
- Side compression on the inside
- Lid pocket
- Lid pocket with small organizer
- Zigzag rubber lacing
- Antenna ports into the main compartment
- Includes 3 hook-and-loop fastening accessories pouches
- Includes weapon holster (hook-and-loop fastening)
- Laser Cut MOLLE System
- MOLLE hook-and-loop on the inside for limitless modularity
System
Padded Back-System (TT)
Volume
30 Liters | 1,831 Cubic Inches
Weight
69oz | 1.95kg
Dimensions
18 x 12 x 7in | 46 x 30 x 18cm
Material
CORDURA® 700 den (Multicam 500 den)
| The reflector glows after the light turns off so it's easy to find in the night.
Specifications:
- Length: 2.65"
- Diameter: .57"
- Stainless Steel Pocket Clip ( Easy to clip onto a hat, MOLLE gear or shirt pocket )
- Glow In the Dark Built In reflector ( Easy to find in the dark )
- LED Type: Cree G2 Emitter ( High Output ) with a life span up to 50,000 hours.
- Flashlight body is machined of solid billet C360 Free Machining Brass ( Buttery Smooth )
- Stainless Steel ring around the dome lens for added durability
- The dome lens has been treated with an AR (Anti-Reflective) coating.
- Proprietary circuit design features reverse polarity protection and runs off of one AAA battery that provides 3 levels of brightness ( Medium / Low/ High ).
Using a single Duracell AAA battery we got the following results:
- Low Mode, 5 lumen output for up to 60 Hours ( Diffused Light )
- Medium Mode, 48 lumen output for up to 4 Hours
- High Mode, 160 lumen output for up to 75 Minutes
| The Flat Gate Clip can be used to keep your everyday carry gear organized and ready for rapid deployment. The Flat Gate Clip is Water Jet cut and is truly made to last and can be used to carry any small preppers paraphernalia you may have.
Specifications:
Small 20 mm x 9.25mm x 3mm ( 3.2 Grams )
Medium 26mm x 12mm x 3mm ( 5.1 Grams )
Large 33mm x 15mm x 4 mm ( 7 Grams )
- Made from 300 series stainless steel
IMPORTANT : This is not a life safety device.
| The Flat Gate Clip can be used to keep your everyday carry gear organized and ready for rapid deployment. The Flat Gate Clip is Water Jet cut and is truly made to last and can be used to carry any small preppers paraphernalia you may have.
Specifications:
Small 20 mm x 9.25mm x 3mm ( 3.2 Grams )
Medium 26mm x 12mm x 3mm ( 5.1 Grams )
Large 33mm x 15mm x 4 mm ( 7 Grams )
- Made from 300 series stainless steel
IMPORTANT : This is not a life safety device.
| EOD Robotics developed this compact breaching tool with input from Bomb Techs, SWAT Operators and Patrol Officers. All these folks need a tool for prying, cutting, pounding, and with extra versatility for shutting off gas valves during emergencies.
Specifications:
- Made from 1045 high carbon steel and fully heat treated to a Rockwell hardness of over 45.
- The EOD Robotics Breacher Bar & CERT Bar come ready to go as a pry bar or lever. Ideal for opening crates and even punching through steel drums etc. The coffin corner back edge lends itself to a hammer nicely.
- The 2 inner holes in the handle can be for paracord or solid slabs or whatever you like. The hole towards the top of the blade and the one on the end are good for lashing it onto a shaft, tree branch etc. The end hole is geared for hanging it up or for attaching a lanyard so you do not lose it in that pit or in the water.
- The top edge can be hammered on as can the back end. And then you can use your imagination to do other things with it. (Makes a good wood chisel too!).
- Bars do not come with cord wrapped handles. You will receive the metal bar. The rest is up to you.
- Not pretty, but pretty handy. These were bulk packed for shipment to the military so they may have some rub marks where they have rubbed together in transit.
- Made in USA
Here's What Our Over-Protective Legal Department Has To Say:
Although the EOD Breacher Tool was developed and designed to enter the real world of urban combat, and with a little work with a file, belt sander, grinder, stone or a rock to it could be sharpened and converted to a Deadly stabbing or slashing instrument we can't recommend it. Likewise, the flat on the handle end should not be used as a skull or rib crusher or for performing other blunt trauma. Sorry these are not returnable. Be safe, and don't play with matches or run with scissors.
| This item has a bit of mystery around it. The original government use for it is unknown. Keep one in your car, home and work. Brand new, never used, overrun from government contract.
What will you use your A/B Cache for?
Possible uses include:
- Geo-Caching
- Pet Identification
- Emergency Cash Stash
- Water Purification Tablets
- Pill Storage.
- Jacket Zipper Pull
Specification:
- Overall Length: 56.5mm or 2.225"
- External Diameter: 16mm or .63"
- Internal Opening: 11.4mm or .45"
- Internal Depth Side A : 16mm or .63"
- Internal Depth Side B : 18mm or .71"
- Lid is secured via flange to cap seal (Internal o-ring)
- U.S. Made
Use responsibly and due to the nature of this item, it is not returnable for obvious sanitation reasons.
Always wash your container with hot water and mild soap for ensured sanitation.
While the original government use is unknown, the A/B Cache dual compartment capsule offers an extremely compact storage option for your EDC needs. Water tight on both ends and offering 2 different size containers from each end this is a highly versatile storage container. This version is solid stainless steel.
Brand new, direct from Maratac, USA. |
