| Content |
Description:
Universal small combat backpack with two attachable pockets and elastic side pockets. Based on the predecessor model, the TT Modular Combat Pack has a clean new look, optimized features and MOLLE hook-and-loop lining in the main compartment for customized modular add-ons. Laser-cut MOLLE on the front and sides mean you can combine it with other gear. With a main compartment that opens completely and the special zipper guides it’s possible to use the pack as a top loader. The shoulder straps can be adjusted in length in order to wear the backpack over vests.
Features:
- Ergonomically padded back with aluminum support elements
- Ergonomically formed, padded shoulder straps
- Detachable hip fins with zipped pockets
- Side compression
- Hydration system compatible
- Side pockets made of an elastic material
- Small mesh pockets inside
- Two front pockets with zipped compartments
- Hook-and-loop closure patch on the frontside (loop)
- MOLLE hook-and-loop on the inside for limitless modularity
- Front and sides with Laser Cut MOLLE to attachment accessories
- Length adjustable shoulder straps make carrying large body armor possible
System
Padded Back-System (TT)
Volume
22 Liters | 1,343 Cubic Inches
Main 17L - Upper/Lower Compartment: 2L / 3L
Weight
56oz |1.6kg
Dimensions
23 x 11 x 5.5in | 59 x 29 x 14cm
Material
CORDURA® 700 den (Multicam 500 den)
Technology
| Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, this was offered as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from government order.
| The reflector glows after the light turns off so it's easy to find in the night.
Specifications:
- Length: 2.65"
- Diameter: .57"
- Stainless Steel Pocket Clip ( Easy to clip onto a hat, MOLLE gear or shirt pocket )
- Glow In the Dark Built In reflector ( Easy to find in the dark )
- LED Type: Cree G2 Emitter ( High Output ) with a life span up to 50,000 hours.
- Flashlight body is machined of solid billet C360 Free Machining Brass ( Buttery Smooth )
- Stainless Steel ring around the dome lens for added durability
- The dome lens has been treated with an AR (Anti-Reflective) coating.
- Proprietary circuit design features reverse polarity protection and runs off of one AAA battery that provides 3 levels of brightness ( Medium / Low/ High ).
Using a single Duracell AAA battery we got the following results:
- Low Mode, 5 lumen output for up to 60 Hours ( Diffused Light )
- Medium Mode, 48 lumen output for up to 4 Hours
- High Mode, 160 lumen output for up to 75 Minutes
| 385 Lumens!!! New even flow beam
Glow O-ring Around The Reflector ( easy to find in the dark )
Black Powder Coat Pocket Rotating Pocket Clip
The light is straightforward to use and has friendly ergonomics. The Maratac AAAx2 Extreme features an advance Cree XP-G2(R5) LED for greater brightness and efficiency.
-  Medium 45 Lumens / Low 5 lumens / High 385 lumens  mode brightness control (Simple 3 mode switching)
- Operation:
- Press and click the back thumb switch to turn on the light into Medium mode. Lightly press again for Low mode and once more for High. Press and click anytime to turn the light off.
SPECIFICATIONS:
- 22.8Â grams or .8Â oz (without battery)
- 5.0" O.A.L. x .58" inch width
- Type 3 Military Grade Anodizing ( Matte Finish )
- Utilizes 2 Standard AAA Batteries ( 1.2-1.7 Volts each )
- Standard Modes ( Pressing Tail Cap Through Modes )
-
- Medium ( 6Â Hours )
- Low ( 90Â hours )
- High ( 1.65 hours )
| Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, this was offered as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from government order.
| The Hults Bruk Torneo is a compact felling axe intended for bringing down or cutting up small to medium sized trees.
This item has an axe head weight of 1.75 Lbs and a handle length of 26 inches. The head is the product of blasted and clear-lacquered ironwork and the curved shaft is made of US-sourced hickory. That handle is treated with linseed oil.
- This axe head is hand-forged and made from Swedish axe steel in a foundry that has been in operation since 1697.
- As part of the production process, the steel is struck multiple times thereby increasing its density and resulting in more durability of the axe.
- The head is constructed in such a way that there is a tempered zone designed to hold a very sharp edge even after many sharpenings.
- Each axe comes with a traditional leather protective sheath that is embellished with some unique Swedish decorative elements. The axe is shipped in its own storage box and comes with a detailed users manual.
|
