| Content |
Description:
Universal small combat backpack with two attachable pockets and elastic side pockets. Based on the predecessor model, the TT Modular Combat Pack has a clean new look, optimized features and MOLLE hook-and-loop lining in the main compartment for customized modular add-ons. Laser-cut MOLLE on the front and sides mean you can combine it with other gear. With a main compartment that opens completely and the special zipper guides it’s possible to use the pack as a top loader. The shoulder straps can be adjusted in length in order to wear the backpack over vests.
Features:
- Ergonomically padded back with aluminum support elements
- Ergonomically formed, padded shoulder straps
- Detachable hip fins with zipped pockets
- Side compression
- Hydration system compatible
- Side pockets made of an elastic material
- Small mesh pockets inside
- Two front pockets with zipped compartments
- Hook-and-loop closure patch on the frontside (loop)
- MOLLE hook-and-loop on the inside for limitless modularity
- Front and sides with Laser Cut MOLLE to attachment accessories
- Length adjustable shoulder straps make carrying large body armor possible
System
Padded Back-System (TT)
Volume
22 Liters | 1,343 Cubic Inches
Main 17L - Upper/Lower Compartment: 2L / 3L
Weight
56oz |1.6kg
Dimensions
23 x 11 x 5.5in | 59 x 29 x 14cm
Material
CORDURA® 700 den (Multicam 500 den)
Technology
| (US Government Model)
NSN: 3740-01-474-7377
When Uncle Sam wanted tweezers for tick and splinter removal, these are the ones they chose.
What makes these so special: Most tweezers are made by spot-welding two pieces of metal together, These tweezers are crafted from a single piece of spring tempered stainless steel or spring titanium.The wide hinge area assures perfect alignment, and the points are hand dressed to exacting specifications. The included tip protector also provides for easy carrying on your key ring or hanging next to your dog tags.
Countless Other Uses:
- Tick removal, home, garden, kitchen, bath, shop, auto, boat, tool box, first aid, hobbies, arts & crafts, fishing, sewing, needlework, removing stitches, hair removal, cosmetics, desk, school, office, pocket/purse, laboratory & medical instrument, splinter & sliver removal
Stainless Steel and Black Passivated Stainless Steel:
Most tweezers are made by spot-welding two pieces of metal together, These tweezers are crafted from a single piece of spring tempered stainless steel.
Specs:
- 2.5" x 0.5" x 0.25"
- (6.3 cm x 13 cm x 6 cm)
| Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, we offered these as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from our government order.
| The Flat Gate Clip can be used to keep your everyday carry gear organized and ready for rapid deployment. The Flat Gate Clip is Water Jet cut and is truly made to last and can be used to carry any small preppers paraphernalia you may have.
Specifications:
Small 20 mm x 9.25mm x 3mm ( 3.2 Grams )
Medium 26mm x 12mm x 3mm ( 5.1 Grams )
Large 33mm x 15mm x 4 mm ( 7 Grams )
- Made from 300 series stainless steel
IMPORTANT : This is not a life safety device.
| 385 Lumens!!! New even flow beam
Glow O-ring Around The Reflector ( easy to find in the dark )
Black Powder Coat Pocket Rotating Pocket Clip
The light is straightforward to use and has friendly ergonomics. The Maratac AAAx2 Extreme features an advance Cree XP-G2(R5) LED for greater brightness and efficiency.
-  Medium 45 Lumens / Low 5 lumens / High 385 lumens  mode brightness control (Simple 3 mode switching)
- Operation:
- Press and click the back thumb switch to turn on the light into Medium mode. Lightly press again for Low mode and once more for High. Press and click anytime to turn the light off.
SPECIFICATIONS:
- 22.8Â grams or .8Â oz (without battery)
- 5.0" O.A.L. x .58" inch width
- Type 3 Military Grade Anodizing ( Matte Finish )
- Utilizes 2 Standard AAA Batteries ( 1.2-1.7 Volts each )
- Standard Modes ( Pressing Tail Cap Through Modes )
-
- Medium ( 6Â Hours )
- Low ( 90Â hours )
- High ( 1.65 hours )
| Use the charging C360 Free Machining Brass ( Buttery Smooth ) head to charge the light and you're all set to keep on trekking.
Can be charged from work, home, laptop, USB Battery pack....
Specifications:
- Length: 1.6" Diameter: .74" Weight: 27.8 Grams - No Battery
- Battery weight 9 Grams
- Comes with extra o-rings
- LED Type: Cree XP-G2 S4 with a life span up to 50,000 hours. ( Newest & Brightest Emitter )
- Orange Peel Reflector for a smooth even beam
- Recharge Time is 30-100 minutes - depending on charge rate source
- The reflector is aluminum alloy.
- Flashlight body is made of C360 Free Machining Brass ( Buttery Smooth )
- Battery is 14250 Lithium Cell 280mAh
- The lens has been treated with a AR (Anti-Reflective) coating.
- Its proprietary circuit design features reverse polarity protection and runs off of one 14250 battery that provides 2 levels of brightness (Low / High).
- Twist on for Low
- Twist 1/2 turn more for High
Using a single 14250 battery we got the following results:
-
Low mode, 15 lumens output for up to 9 hours
-
High mode, 305 lumens output for up to 40 minutes
Includes Complete Kit:
1x Lithium Rechargable Battery
1x USB Charging Cable
1x Charging SS Head With Charge indicator
1x PCL Light C360 Solid Brass Head & Body
4x Spare O-Rings |
