| Content | WORLDS FIRST PRODUCTION LED BRASS FLASHLIGHT...THE SMALLEST, BRIGHTEST, AAA FLASHLIGHT? WE THINK SO!
NEW FOR 2018 - NICHIA 219C WITH A LIFESPAN UP TO 50,000 HOURS. ( NEWEST & BRIGHTEST EMITTER )
Check out this AAA powerhouse.
After thousands of Request ( Medium / Low / High )
Specifications:
- Executive Series
- Glow in the dark Diffuser ( New for Rev 3 )
- Glow in the Dark front o-ring around reflector ( New for Rev 3 )
- Each light is hand finished.
- Length: 2.6" ( Smaller than Rev 1 )
- Diameter: .5"
- Weight with battery is 37.3 grams ( 28.1 grams without battery )
- LED Type: Nichia 219C with a lifespan up to 50,000 hours. ( Newest & Brightest Emitter )
* Now with the same ultra-low thermal resistance as Cree
- The New Orange Peel Reflector is aluminum alloy.
- Flashlight body is machined of solid billet ultra conductive C360 Free Machining Brass ( Buttery Smooth ) Brass.
- The lens has been treated with an AR (anti-reflective) coating.
- Its proprietary circuit design features reverse polarity protection and runs off of one AAA battery that provides
- Now with 3 levels of brightness ( Medium - Low - High ).
- Comes with clip & o-rings
- Note: this is a solid Brass flashlight not plated
- Clip installed from factory to preserve finish
- New Stronger Clip
Using a single Duracell AAA battery we got the following results:
- Medium mode, 48 lumens output for up to 8 hours
- Low mode, 1.5 lumens output for up to 65 hours
- High mode, 170 lumens output for up to 75 minutes
- ( Rev 1 model was 80 Lumens and 48 minutes) ( Rev 2 model was 115 Lumens and 60 minutes)
| Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, this was offered as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from government order.
| Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, we offered these as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from our government order.
| Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, this was offered as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from government order.
| The possibilities are endless of what this tool can carry! AA battery, geo-caching, pet identification, emergency cash stash, water purification tablets storm proof matches, cotton balls for fire starting, pills, needle, thread, etc. One side of the Tube-A-Ton is a battery locker which fits AA batteries perfectly. Brand new, never used overrun from government contract. Each side has a tight o-ring seal to prevent exposure to moisture in the toughest conditions. Has large loop hole for attaching lanyards and split rings for EDC (Every Day Carry).
Tube-A-Ton fits a AA on each side !
The possibilities are endless!
TITANIUM MODEL SPECS
Overall length: 159.00 mm or 6.17
External diameter: 19.00 mm or .75"
Internal opening: 14.45 mm or .57"
Internal depth: 49.00 mm or 1.95" & 69.2 mm or 2.72"
Lid is secured via flange to cap seal (internal o-ring)
Titanium : 6AL-4V
Weight :102.5 Grams
| Use the charging C360 Free Machining Brass ( Buttery Smooth ) head to charge the light and you're all set to keep on trekking.
Can be charged from work, home, laptop, USB Battery pack....
Specifications:
- Length: 1.6" Diameter: .74" Weight: 27.8 Grams - No Battery
- Battery weight 9 Grams
- Comes with extra o-rings
- LED Type: Cree XP-G2 S4 with a life span up to 50,000 hours. ( Newest & Brightest Emitter )
- Orange Peel Reflector for a smooth even beam
- Recharge Time is 30-100 minutes - depending on charge rate source
- The reflector is aluminum alloy.
- Flashlight body is made of C360 Free Machining Brass ( Buttery Smooth )
- Battery is 14250 Lithium Cell 280mAh
- The lens has been treated with a AR (Anti-Reflective) coating.
- Its proprietary circuit design features reverse polarity protection and runs off of one 14250 battery that provides 2 levels of brightness (Low / High).
- Twist on for Low
- Twist 1/2 turn more for High
Using a single 14250 battery we got the following results:
-
Low mode, 15 lumens output for up to 9 hours
-
High mode, 305 lumens output for up to 40 minutes
Includes Complete Kit:
1x Lithium Rechargable Battery
1x USB Charging Cable
1x Charging SS Head With Charge indicator
1x PCL Light C360 Solid Brass Head & Body
4x Spare O-Rings |
