| Content | These custom high-saturation ferrites are made of a special high-frequency material and uniquely modified to help prevent high-current saturation. Ferrites are clamped around the insulated battery wires, one going around the red wire and one around the black. If your battery has several leads, you can either select the one to protect, or buy additional ferrites for the other leads. See the video below for installation instructions.
Ferrite dimensions: Inner Diameter 0.72″, Outer Diameter 1.5″, Length 1.9″. | This 7.0 mil Moisture Barrier 5-layer EMP kit offers the most protection in a single bag of its class on the market today! With 11,500 PSI tensile strength, 33lb puncture resistance, and >40db EMI attenuation, this bag offers great protection for your items. Tested to meet or exceed certain electrical and physical requirements of ANSI/ESD S541 and to be ANSI/ESD S20.20 compliant. Bags are ROHS compliant and lead-free.
The 5 Piece Kit Includes:
1 - 12"x18"
1 - 8"x10"
3 - 5"x7"
This aluminized moisture barrier bag is designed to provide a static safe environment for sensitive electronic devices. A stronger polyester layer (Heavy Gauge) helps prevent sharp objects from puncturing and destroying the effectiveness of the bag. The bags are heat sealable and suitable for vacuum packaging.
– 2 Aluminum metal layers in this 5-layer bag provide maximum EMP bag protection
– 33 lb puncture resistance (FTMS 101-C, 2065.1)
– >40 dB EMI Attenuation (MIL-PFR-81705-REV.D)
– Surface Resistivity 12 Ohms / Sq. In. (ASTM 1-257)
– 7 mil Thickness (MIL-STD-3010C Method 1003)
– Moisture Barrier (MIL-STD-3010C Method 3030)
Heat Sealing Conditions:
– Temperature (400 degrees F, 204 degrees C)
– Time (.6 to 4.5 seconds)
– Pressure (30 – 70 PSI, 206-482 KPa)
| The T.R.A.P.™-AC contains a higher-voltage 5,000-watt transient voltage suppression device in a form factor that plugs into the three-prong AC receptacle of an inverter or portable generator. | The T.R.A.P.™-B contains the same 5,000-watt transient voltage suppression device in a form factor that can be easily connected across the 12-volt batteries in vehicles, generators, or solar power generation systems. | The Faraday Dry Generator Bag is designed for travel and storage of generators, computer towers and equipment. This bag will keep your gear dry and secure with its watertight seal and signal blocking design. Three layers of CYBER NC(Nickel/Copper) line the interior, providing EMP protection, RF/EMF shielding, and location blocking. The Dry Generator Bag features MOLLE webbing on the front and back for attaching smaller gear. With multiple handles and tightening straps, the bag has a sleek design that is easy to carry. The Dry Generator Bag measures 11″ L x 15.5″W x 20″H when closed.
| These custom ferrites are made of a special high-frequency material and uniquely modified to help prevent high-current saturation. A ferrite is clamped around the insulated incoming power wires in your breaker panel. Most homes require three ferrites, but a few homes may require four ferrites (see video below).
Ferrite dimensions: Inner Diameter 0.72″, Outer Diameter 1.5″, Length 1.9″. |
