| Content | These custom high-saturation ferrites are made of a special high-frequency material and uniquely modified to help prevent high-current saturation. Ferrites are clamped around the insulated battery wires, one going around the red wire and one around the black. If your battery has several leads, you can either select the one to protect, or buy additional ferrites for the other leads. See the video below for installation instructions.
Ferrite dimensions: Inner Diameter 0.72″, Outer Diameter 1.5″, Length 1.9″. | Keep your vital documents and phone protected from both theft and hacking while on the go. The Faraday Waist Pack is designed for travel and storage of important documents, passport, tickets, credit cards, cell phone and more. This fanny pack, worn as a belt or cross-body, will keep your valuables secure with its RFID and Signal-blocking design. Triple layers of CYBER NC (Nickel/Copper) line the front pocket, providing EMP protection and RF/EMF shielding. The Waist Pack measures 5-¾”” x 14”. | The T.R.A.P.™ Transient Reducing Auxiliary Plug is a multi-purpose transient protection device. Each plug contains a 5,000-watt transient voltage suppression device with < 1 picosecond turn on time! The T.R.A.P.™ plugs into the 12-Volt auxiliary receptacle (aka cigarette lighter) of vehicles and generators. | Use the JACKET Key FOB Bag to prevent your car from being stolen. Car thieves will take advantage of your FOB by boosting the signal while near your house, a parking garage, or another parking area. This allows them to get in your car and drive away. The key FOB bag blocks that signal from being accessed and boosted, keeping your car safe while not in use. This bag can also be used for USBs, SSDs and credit cards. The bag measures 3″ x 4.75″, offers 85 dB attenuation (400 MHz-4 GHz), and is made with black heavy duty canvas. | This 15 piece kit of 7.0 mil Moisture Barrier 5-layer EMP bag offers the most protection in a single bag of its class on the market today! With 11,500 PSI tensile strength, 33lb puncture resistance, and >40db EMI attenuation, this bag offers great protection for your items. Tested to meet or exceed certain electrical and physical requirements of ANSI/ESD S541 and to be ANSI/ESD S20.20 compliant. Bags are ROHS compliant and lead-free.
Included in the 15 piece kit:
3 - 16"x20"
2 - 12"x18"
4 - 8"x10"
6 - 5"x7"
This aluminized moisture barrier bag is designed to provide a static safe environment for sensitive electronic devices. A stronger polyester layer (Heavy Gauge) helps prevent sharp objects from puncturing and destroying the effectiveness of the bag. The bags are heat sealable and suitable for vacuum packaging.
– 2 Aluminum metal layers in this 5-layer bag provide maximum EMP bag protection
– 33 lb puncture resistance (FTMS 101-C, 2065.1)
– >40 dB EMI Attenuation (MIL-PFR-81705-REV.D)
– Surface Resistivity 12 Ohms / Sq. In. (ASTM 1-257)
– 7 mil Thickness (MIL-STD-3010C Method 1003)
– Moisture Barrier (MIL-STD-3010C Method 3030)
Heat Sealing Conditions:
– Temperature (400 degrees F, 204 degrees C)
– Time (.6 to 4.5 seconds)
– Pressure (30 – 70 PSI, 206-482 KPa)
| This kit of 7.0 mil Moisture Barrier 5-layer EMP bags offers the most protection in a single bag of their class on the market today! With 11,500 PSI tensile strength, 33lb puncture resistance, and >40db EMI attenuation, this bag offers great protection for your items. Tested to meet or exceed certain electrical and physical requirements of ANSI/ESD S541 and to be ANSI/ESD S20.20 compliant. Bags are ROHS compliant and lead-free.
Included in this kit:
2 - 12"x18"
3 - 8"x10"
5 - 5"x7"
This aluminized moisture barrier bag is designed to provide a static safe environment for sensitive electronic devices. A stronger polyester layer (Heavy Gauge) helps prevent sharp objects from puncturing and destroying the effectiveness of the bag. The bags are heat sealable and suitable for vacuum packaging.
– 2 Aluminum metal layers in this 5-layer bag provide maximum EMP bag protection
– 33 lb puncture resistance (FTMS 101-C, 2065.1)
– >40 dB EMI Attenuation (MIL-PFR-81705-REV.D)
– Surface Resistivity 12 Ohms / Sq. In. (ASTM 1-257)
– 7 mil Thickness (MIL-STD-3010C Method 1003)
– Moisture Barrier (MIL-STD-3010C Method 3030)
Heat Sealing Conditions:
– Temperature (400 degrees F, 204 degrees C)
– Time (.6 to 4.5 seconds)
– Pressure (30 – 70 PSI, 206-482 KPa)
|
