CAVESTOCK

Free Standard Shipping for Orders Over $200. Learn More

Availability: In Stock

High Saturation Ferrite Vehicle EMP Protection

SKU: 14606

$60.00

Category:

Description

These custom high-saturation ferrites are made of a special high-frequency material and uniquely modified to help prevent high-current saturation. Ferrites are clamped around the insulated battery wires, one going around the red wire and one around the black. If your battery has several leads, you can either select the one to protect, or buy additional ferrites for the other leads. See the video below for installation instructions.

Ferrite dimensions: Inner Diameter 0.72″, Outer Diameter 1.5″, Length 1.9″.

Additional information

Weight 0.0 kg
upc

Quick Comparison

SettingsHigh Saturation Ferrite Vehicle EMP Protection remove10pc Credit Card NEST-Z 7.0 mil Faraday Bags 2.5" x 4" removeEMP Whole-House Ferrites removeJACKET XXL Forensic Faraday Laptop Bag (14" x 16″) removeSurvivor Symbols RFID-blocking Card removeNEST-Z EMP Bags - 15 Piece Kit remove
NameHigh Saturation Ferrite Vehicle EMP Protection remove10pc Credit Card NEST-Z 7.0 mil Faraday Bags 2.5" x 4" removeEMP Whole-House Ferrites removeJACKET XXL Forensic Faraday Laptop Bag (14" x 16″) removeSurvivor Symbols RFID-blocking Card removeNEST-Z EMP Bags - 15 Piece Kit remove
Image
SKU146067428514605743091460174258
Rating
Price$60.00$42.99$60.00$84.99$20.00$74.99
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentThese custom high-saturation ferrites are made of a special high-frequency material and uniquely modified to help prevent high-current saturation. Ferrites are clamped around the insulated battery wires, one going around the red wire and one around the black. If your battery has several leads, you can either select the one to protect, or buy additional ferrites for the other leads. See the video below for installation instructions. Ferrite dimensions: Inner Diameter 0.72″, Outer Diameter 1.5″, Length 1.9″.

The Nest-Z is an RFID Blocking 7.0mil Bag for Credit Cards, SD Cards, Memory Cards, USB Sticks and more. Heavy duty ziploc allows for secure seal, and >40db attenuation provides protection against external RFID. These bags offer EMP protection.

This kit includes 10 2.5" x 4" bags

With 11,500 PSI tensile strength, 33lb puncture resistance, and >40db EMI attenuation, this bag offers great protection for your items. Tested to meet or exceed certain electrical and physical requirements of ANSI/ESD S541 and to be ANSI/ESD S20.20 compliant. Bag is ROHS compliant and lead-free.

This aluminized moisture barrier bag is designed to provide a static safe environment for sensitive electronic devices.  A stronger polyester layer (Heavy Gauge) helps prevent sharp objects from puncturing and destroying the effectiveness of the bag.  The bags are heat sealable and suitable for vacuum packaging.

– 2 Aluminum metal layers in this 5-layer bag provide maximum EMP bag protection

– 33 lb puncture resistance (FTMS 101-C, 2065.1)

– >40 dB EMI Attenuation (MIL-PFR-81705-REV.D)

– Surface Resistivity 12 Ohms / Sq. In. (ASTM 1-257)

– 7 mil Thickness (MIL-STD-3010C Method 1003)

– Moisture Barrier (MIL-STD-3010C Method 3030)

Heat Sealing Conditions:

– Temperature (400 degrees F, 204 degrees C)

– Time (.6 to 4.5 seconds)

– Pressure (30 – 70 PSI, 206-482 KPa)

These custom ferrites are made of a special high-frequency material and uniquely modified to help prevent high-current saturation. A ferrite is clamped around the insulated incoming power wires in your breaker panel. Most homes require three ferrites, but a few homes may require four ferrites (see video below). Ferrite dimensions: Inner Diameter 0.72″, Outer Diameter 1.5″, Length 1.9″.

The JACKET XXL Faraday Bag is 14″ x 16″ and offers 85 dB attenuation (400 MHz-4 GHz). Ideally sized for Ham radios, laptops, external hard drives and tablets, the High-quality Blocking Material and Quality Precision Stitching allow for the blocking of Cell Signal, GPS, RFID and WiFi Signal. This technology allows you to maintain your device’s integrity and prevent remote influences from touching your device. See other listings for additional variations and sizes of privacy bags. Anti-tracking & Anti-spying from Faraday Defense.

The Survivor Symbols Card uses advanced technology to protect ALL of your credit cards against RFID theft. It is also printed with the entire set of official Survivor Symbols, allowing you and other survivors to share critical information during times of crisis.

This 15 piece kit of 7.0 mil Moisture Barrier 5-layer EMP bag offers the most protection in a single bag of its class on the market today!  With 11,500 PSI tensile strength, 33lb puncture resistance, and >40db EMI attenuation, this bag offers great protection for your items. Tested to meet or exceed certain electrical and physical requirements of ANSI/ESD S541 and to be ANSI/ESD S20.20 compliant. Bags are ROHS compliant and lead-free.

Included in the 15 piece kit:

3 - 16"x20"

2 - 12"x18"

4 - 8"x10"

6 - 5"x7"

This aluminized moisture barrier bag is designed to provide a static safe environment for sensitive electronic devices.  A stronger polyester layer (Heavy Gauge) helps prevent sharp objects from puncturing and destroying the effectiveness of the bag.  The bags are heat sealable and suitable for vacuum packaging.

– 2 Aluminum metal layers in this 5-layer bag provide maximum EMP bag protection

– 33 lb puncture resistance (FTMS 101-C, 2065.1)

– >40 dB EMI Attenuation (MIL-PFR-81705-REV.D)

– Surface Resistivity 12 Ohms / Sq. In. (ASTM 1-257)

– 7 mil Thickness (MIL-STD-3010C Method 1003)

– Moisture Barrier (MIL-STD-3010C Method 3030)

Heat Sealing Conditions:

– Temperature (400 degrees F, 204 degrees C)

– Time (.6 to 4.5 seconds)

– Pressure (30 – 70 PSI, 206-482 KPa)

Weight0.0 kg0.0 kgN/A0.0 kg0.0 kgN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.0 kg
upc

Weight 0.0 kg
upc

upc

Weight 0.0 kg
upc

Weight 0.0 kg
upc

upc

You're viewing: High Saturation Ferrite Vehicle EMP Protection $60.00
Add to cart
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Shopping cart close