| Content |
DESCRIPTION:
Transparent pouches with hook-and-loop closures that convert a backpack with hook-and-loop interior into a Medic Pack. This set is especially made for the TT Modular Pack 45. Two basic pouches go in the middle and two long and two short pouches go on the sides. A removable divider has smaller pockets on it. The elastic loop set for bandages and accessories can be attached to all of the hook and loop panels. The TT Modular Medic Insert 45 Set is great for outfitting other TT backpacks, but not all of the pieces may not be used.
FEATURES:
- Colored zipper puller
- Including a selection of colored hook-and-loop strips
- Blind hook-and-loop fastening available
- Small stowable in the included storage bag
- 3 accessory bags 8 x 5 x 2in | 21 x 13 x 5cm - 4oz | 110 g each
- 2 accessory bags 10 x 9 x 4in | 25 x 23 x 10cm - 7oz | 190 g each
- 2 accessory bags 9 x 6.5 x 2.5in | 23 x 16.5 x 6.5cm - 3oz | each 95 g
- 1 accessory bag 8 x 7 x 1in | 21 x 18 x 2cm - 4oz | 105 g
- 1 accessory bag 6.5 x 18 x 2.5in | 16.5 x 46 x 6.5cm - 5oz | 150 g
- 1 panel with elastic loops 7 x 7in | 17 x 18cm - 3oz | 75 g
- 1 panel 8 x 24in | 21 x 60cm - 4oz | 110 g
- 2 elastic straps with loops 4 x 8 x 1in | 10 x 20 x 2 cm - 2oz | 50 g
- 2 TQ holders 1 x 8in | 2.5 x 21cm - .5oz | 10 g
WEIGHT
56oz | 1.6kg
DIMENSIONS
11 x 9 x 6in | 29 x 24 x 15 cm
MATERIAL
420 HD Nylon
TECHNOLOGY
ZIPS
| | The possibilities are endless of what this tool can carry! AA battery, geo-caching, pet identification, emergency cash stash, water purification tablets storm proof matches, cotton balls for fire starting, pills, needle, thread, etc. One side of the Tube-A-Ton is a battery locker which fits AA batteries perfectly. Brand new, never used overrun from government contract. Each side has a tight o-ring seal to prevent exposure to moisture in the toughest conditions. Has large loop hole for attaching lanyards and split rings for EDC (Every Day Carry).
Tube-A-Ton fits a AA on each side !
The possibilities are endless!
TITANIUM MODEL SPECS
Overall length: 159.00 mm or 6.17
External diameter: 19.00 mm or .75"
Internal opening: 14.45 mm or .57"
Internal depth: 49.00 mm or 1.95" & 69.2 mm or 2.72"
Lid is secured via flange to cap seal (internal o-ring)
Titanium : 6AL-4V
Weight :102.5 Grams
| Use the charging C360 Free Machining Brass ( Buttery Smooth ) head to charge the light and you're all set to keep on trekking.
Can be charged from work, home, laptop, USB Battery pack....
Specifications:
- Length: 1.6" Diameter: .74" Weight: 27.8 Grams - No Battery
- Battery weight 9 Grams
- Comes with extra o-rings
- LED Type: Cree XP-G2 S4 with a life span up to 50,000 hours. ( Newest & Brightest Emitter )
- Orange Peel Reflector for a smooth even beam
- Recharge Time is 30-100 minutes - depending on charge rate source
- The reflector is aluminum alloy.
- Flashlight body is made of C360 Free Machining Brass ( Buttery Smooth )
- Battery is 14250 Lithium Cell 280mAh
- The lens has been treated with a AR (Anti-Reflective) coating.
- Its proprietary circuit design features reverse polarity protection and runs off of one 14250 battery that provides 2 levels of brightness (Low / High).
- Twist on for Low
- Twist 1/2 turn more for High
Using a single 14250 battery we got the following results:
-
Low mode, 15 lumens output for up to 9 hours
-
High mode, 305 lumens output for up to 40 minutes
Includes Complete Kit:
1x Lithium Rechargable Battery
1x USB Charging Cable
1x Charging SS Head With Charge indicator
1x PCL Light C360 Solid Brass Head & Body
4x Spare O-Rings | | EOD Robotics developed this compact breaching tool with input from Bomb Techs, SWAT Operators and Patrol Officers. All these folks need a tool for prying, cutting and pounding, and here's the answer.
Specifications:
- Made from 1045 high carbon steel and fully heat treated to a Rockwell hardness of over 45.
- The EOD Robotics Breacher Bar & CERT Bar come ready to go as a pry bar or lever. Ideal for opening crates and even punching through steel drums etc. The coffin corner back edge lends itself to a hammer nicely.
- The 2 inner holes in the handle can be for paracord or solid slabs or whatever you like. The hole towards the top of the blade and the one on the end are good for lashing it onto a shaft, tree branch etc. The end hole is geared for hanging it up or for attaching a lanyard so you do not lose it in that pit or in the water.
- The top edge can be hammered on as can the back end. And then you can use your imagination to do other things with it. (Makes a good wood chisel too!).
- Bars do not come with cord wrapped handles. You will receive the metal bar. The rest is up to you.
- Not pretty, but pretty handy. These were bulk packed for shipment to the military so they may have some rub marks where they have rubbed together in transit.
- Made in USA
Here's What Our Over-Protective Legal Department Has To Say:
Although the EOD Breacher Tool was developed and designed to enter the real world of urban combat, and with a little work with a file, belt sander, grinder, stone or a rock to it could be sharpened and converted to a Deadly stabbing or slashing instrument we can't recommend it. Likewise, the flat on the handle end should not be used as a skull or rib crusher or for performing other blunt trauma. Sorry these are not returnable. Be safe, and don't play with matches or run with scissors.
|
