Sven Folding Saw 15 inch Blade

The Flat Gate Clip can be used to keep your everyday carry gear organized and ready for rapid deployment. The Flat Gate Clip is Water Jet cut and is truly made to last and can be used to carry any small preppers paraphernalia you may have.

Specifications:

       Small 20 mm x 9.25mm x 3mm ( 3.2 Grams )
       Medium 26mm x 12mm x 3mm ( 5.1 Grams )
       Large 33mm x 15mm x 4 mm ( 7 Grams )

• Made from 300 series stainless steel

IMPORTANT : This is not a life safety device.

The Hults Bruk Akka Forester's Axe is a perfect companion for the wilderness and clearing forest trails.

The Akka features a long, curved 24" American hickory handle paired with a 1.5 lb. axe head for exceptional leverage and power in a lightweight package. The straight knife-ground edge and finger notch near the neck make carving tasks a joy. With a total weight of just 2.2 lbs. the Akka is is ideal for overnight wilderness trips and fantastic for clearing forest trails.

• The axe head is hand-forged and made from Swedish axe steel in a foundry that has been in operation since 1697.
• As part of the hand grinding production process, the steel is struck multiple times thereby increasing its density and resulting in more durability of the axe.
• The head is constructed in such a way that there is a tempered zone designed to hold a very sharp edge even after many sharpenings.
• The straight hickory handle is treated with linseed oil.
• Each axe comes with a traditional leather protective sheath that is embellished with some unique Swedish decorative elements. (Replacement sheaths are available) The axe is shipped in its own storage box and comes with a detailed users manual.

Product Specs

Overall Weight: 2.2 lbs.

Head Weight: 1.5 lbs.

Handle Length: 24"

Head: Solid Swedish steel

Handle: Solid American Hickory

385 Lumens!!! New even flow beam

Glow O-ring Around The Reflector ( easy to find in the dark )

Black Powder Coat Pocket Rotating Pocket Clip

The light is straightforward to use and has friendly ergonomics. The Maratac AAAx2 Extreme features an advance Cree XP-G2(R5) LED for greater brightness and efficiency.

•  Medium 45 Lumens / Low 5 lumens / High 385 lumens  mode brightness control (Simple 3 mode switching)
• Operation:
  • Press and click the back thumb switch to turn on the light into Medium mode. Lightly press again for Low mode and once more for High. Press and click anytime to turn the light off.

SPECIFICATIONS:

• 22.8 grams or .8 oz (without battery)
• 5.0" O.A.L. x .58" inch width
• Type 3 Military Grade Anodizing ( Matte Finish )
• Utilizes 2 Standard AAA Batteries ( 1.2-1.7 Volts each )
• Standard Modes ( Pressing Tail Cap Through Modes )
• • Medium ( 6 Hours )
  • Low ( 90 hours )
  • High ( 1.65 hours )

Use the charging C360 Free Machining Brass ( Buttery Smooth ) head to charge the light and you're all set to keep on trekking.

Can be charged from work, home, laptop, USB Battery pack....

Specifications: 

• Length: 1.6" Diameter: .74" Weight: 27.8 Grams - No Battery 
• Battery weight 9 Grams
• Comes with extra o-rings
• LED Type: Cree XP-G2 S4 with a life span up to 50,000 hours. ( Newest & Brightest Emitter )
• Orange Peel Reflector for a smooth even beam
• Recharge Time is 30-100 minutes - depending on charge rate source
• The reflector is aluminum alloy.
• Flashlight body is made of C360 Free Machining Brass ( Buttery Smooth )
• Battery is 14250 Lithium Cell 280mAh
• The lens has been treated with a AR (Anti-Reflective) coating.
• Its proprietary circuit design features reverse polarity protection and runs off of one 14250 battery that provides 2 levels of brightness (Low / High).
  • Twist on for Low
  • Twist 1/2 turn more for High

Using a single 14250 battery we got the following results:

• Low mode, 15 lumens output for up to 9 hours

• High mode, 305 lumens output for up to 40 minutes

Includes Complete Kit:

1x Lithium Rechargable Battery
1x USB Charging Cable 
1x Charging SS Head With Charge indicator
1x PCL Light C360 Solid Brass Head & Body
4x Spare O-Rings

Proudly U.S.A Made!

When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, we offered these as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from our government order.