| Content | The perfect lightweight camping axe for the outdoor enthusiast. Designed especially for hiking and camping, this axe features a 1-1/4 lb head with a 15" handle. Also known as the Young Camper's Belt Axe, this makes a great starter axe for the young camper! Manufactured with the same integrity as the rest of the axe line from 100% US steel and hickory, this axe will be passed on from one generation to the next. Genuine leather belt sheath included.
Dimensions
- Overall Length: 15-3/4"
- Cutting Edge, Heel to Toe: 3-1/8"
- Head Length, Butt to Cutting Edge: 5-3/8"
- Butt: 2-3/16" X 7/8"
- Overall Weight (without sheath): 2 lb. 0.4 oz.
What to expect when you receive your new axe
All Snow and Nealley axes are hand-assembled and finished in a small craftsman's shop. You can expect the grain of the axe handle and the texture of the leather sheath to vary from the picture in this listing. In addition, there may be slight variations in the finish on the head.
Snow and Nealley gives each axe head a clearcoat finish to prevent rust during shipping. The finish will come off during sharpening and use. This is normal.
Axe heads are hand-tempered and hand-ground. They are shipped sharp enough to cut, but without the final edge that many users will prefer. You may add the final touches according to your preference with a file, grinding stone, or grinding wheel. | Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, this was offered as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from government order.
| 385 Lumens!!! New even flow beam
Glow O-ring Around The Reflector ( easy to find in the dark )
Black Powder Coat Pocket Rotating Pocket Clip
The light is straightforward to use and has friendly ergonomics. The Maratac AAAx2 Extreme features an advance Cree XP-G2(R5) LED for greater brightness and efficiency.
-  Medium 45 Lumens / Low 5 lumens / High 385 lumens  mode brightness control (Simple 3 mode switching)
- Operation:
- Press and click the back thumb switch to turn on the light into Medium mode. Lightly press again for Low mode and once more for High. Press and click anytime to turn the light off.
SPECIFICATIONS:
- 22.8Â grams or .8Â oz (without battery)
- 5.0" O.A.L. x .58" inch width
- Type 3 Military Grade Anodizing ( Matte Finish )
- Utilizes 2 Standard AAA Batteries ( 1.2-1.7 Volts each )
- Standard Modes ( Pressing Tail Cap Through Modes )
-
- Medium ( 6Â Hours )
- Low ( 90Â hours )
- High ( 1.65 hours )
| The reflector glows after the light turns off so it's easy to find in the night.
Specifications:
- Length: 2.65"
- Diameter: .57"
- Stainless Steel Pocket Clip ( Easy to clip onto a hat, MOLLE gear or shirt pocket )
- Glow In the Dark Built In reflector ( Easy to find in the dark )
- LED Type: Cree G2 Emitter ( High Output ) with a life span up to 50,000 hours.
- Flashlight body is machined of solid billet C360 Free Machining Brass ( Buttery Smooth )
- Stainless Steel ring around the dome lens for added durability
- The dome lens has been treated with an AR (Anti-Reflective) coating.
- Proprietary circuit design features reverse polarity protection and runs off of one AAA battery that provides 3 levels of brightness ( Medium / Low/ High ).
Using a single Duracell AAA battery we got the following results:
- Low Mode, 5 lumen output for up to 60 Hours ( Diffused Light )
- Medium Mode, 48 lumen output for up to 4 Hours
- High Mode, 160 lumen output for up to 75 Minutes
| Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, we offered these as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from our government order.
| Use the charging C360 Free Machining Brass ( Buttery Smooth ) head to charge the light and you're all set to keep on trekking.
Can be charged from work, home, laptop, USB Battery pack....
Specifications:
- Length: 1.29" Diameter: .52" Weight: 9.9 Grams
- Battery weight 3.4 Grams
- Comes with extra o-rings
- LED Type: Cree XP-G2 S4 with a life span up to 50,000 hours. ( Newest & Brightest Emitter )
- Orange Peel Reflector for a smooth even beam
- Recharge Time is 35-55 minutes
- The reflector is aluminum alloy.
- Flashlight body is made of C360 Free Machining Brass ( Buttery Smooth )
- Battery is 10180 Lithium Cell 70mAh
- The lens has been treated with a AR (Anti-Reflective) coating.
- Its proprietary circuit design features reverse polarity protection and runs off of one 10180 battery that provides 2 levels of brightness (Low / High).
- Twist on for Low
- Twist 1/2 turn more for High
Using a single 10180 battery we got the following results:
-
Low mode, 12 lumens output for up to 6 hours
-
High mode, 145 lumens output for up to 25 minutes
Includes Complete Kit:
1x Lithium Rechargable Battery
1x USB Charging Cable
1x Charging SS Head With Charge indicator
1x Peanut Light C360 Solid Brass Head & Body
5x Spare O-Rings |
