EKA Hatchblade W1 Wood Pattern

Handle Finish: Sand

Blade Finish: Black Stonewash

Blade Material: Swedish Sandvik Steel

Overall Length: 12.75 in

Sheath Material: KYDEX

Handle Material: Wood

The reflector glows after the light turns off so it's easy to find in the night.

Specifications:

• Length: 2.65" 
• Diameter: .57" 
• Stainless Steel Pocket Clip ( Easy to clip onto a hat, MOLLE gear or shirt pocket )
• Glow In the Dark Built In reflector ( Easy to find in the dark )
• LED Type: Cree G2 Emitter ( High Output ) with a life span up to 50,000 hours. 
• Flashlight body is machined of solid billet C360 Free Machining Brass ( Buttery Smooth )
• Stainless Steel ring around the dome lens for added durability
• The dome lens has been treated with an AR (Anti-Reflective) coating.
• Proprietary circuit design features reverse polarity protection and runs off of one AAA battery that provides 3 levels of brightness ( Medium / Low/ High ).

Using a single Duracell AAA battery we got the following results:

• Low Mode, 5 lumen output for up to 60 Hours ( Diffused Light )
• Medium Mode, 48 lumen output for up to 4 Hours
• High Mode, 160 lumen output for up to 75 Minutes

Proudly U.S.A Made!

When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, we offered these as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from our government order.

Proudly U.S.A Made!

When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, this was offered as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from government order.

EOD Robotics developed this compact breaching tool with input from Bomb Techs, SWAT Operators and Patrol Officers. All these folks need a tool for prying, cutting and pounding, and here's the answer.

Specifications:

• Made from 1045 high carbon steel and fully heat treated to a Rockwell hardness of over 45.
• The EOD Robotics Breacher Bar & CERT Bar come ready to go as a pry bar or lever. Ideal for opening crates and even punching through steel drums etc. The coffin corner back edge lends itself to a hammer nicely.
• The 2 inner holes in the handle can be for paracord or solid slabs or whatever you like. The hole towards the top of the blade and the one on the end are good for lashing it onto a shaft, tree branch etc. The end hole is geared for hanging it up or for attaching a lanyard so you do not lose it in that pit or in the water.
• The top edge can be hammered on as can the back end. And then you can use your imagination to do other things with it. (Makes a good wood chisel too!).
• Bars do not come with cord wrapped handles. You will receive the metal bar. The rest is up to you.
• Not pretty, but pretty handy. These were bulk packed for shipment to the military so they may have some rub marks where they have rubbed together in transit.
• Made in USA

Here's What Our Over-Protective Legal Department Has To Say:
Although the EOD Breacher Tool was developed and designed to enter the real world of urban combat, and with a little work with a file, belt sander, grinder, stone or a rock to it could be sharpened and converted to a Deadly stabbing or slashing instrument we can't recommend it. Likewise, the flat on the handle end should not be used as a skull or rib crusher or for performing other blunt trauma. Sorry these are not returnable. Be safe, and don't play with matches or run with scissors.