| Content | These custom high-saturation ferrites are made of a special high-frequency material and uniquely modified to help prevent high-current saturation. Ferrites are clamped around the insulated battery wires, one going around the red wire and one around the black. If your battery has several leads, you can either select the one to protect, or buy additional ferrites for the other leads. See the video below for installation instructions.
Ferrite dimensions: Inner Diameter 0.72″, Outer Diameter 1.5″, Length 1.9″. | The Small 3 Piece NX3 Kit is made to help you protect your devices from outside influences, and yourself from your own devices’ EMF output. This kit includes 1 Laptop Bag, 1 Tablet Bag, and 1 Phone Bag. Designed for UNIVERSAL shielding of all laptops, tablets, cell phones, key fobs, credit cards, small hard drives, and USB drives. | These custom ferrites are made of a special high-frequency material and uniquely modified to help prevent high-current saturation. A ferrite is clamped around the insulated incoming power wires in your breaker panel. Most homes require three ferrites, but a few homes may require four ferrites (see video below).
Ferrite dimensions: Inner Diameter 0.72″, Outer Diameter 1.5″, Length 1.9″. | RF Blocking Cardholder Wallet designed in the USA by the leader in quality RFID Blocking bags. Reduces chance of Identity Theft with multiple Credit Card compartments and a Cash/ID with Pull Tab compartment. All lined with RF Blocking Material. | The T.R.A.P.™-AC contains a higher-voltage 5,000-watt transient voltage suppression device in a form factor that plugs into the three-prong AC receptacle of an inverter or portable generator. | The Nest-Z is an RFID Blocking 7.0mil Bag for Credit Cards, SD Cards, Memory Cards, USB Sticks and more. Heavy duty ziploc allows for secure seal, and >40db attenuation provides protection against external RFID. These bags offer EMP protection.
This kit includes 10 2.5" x 4" bags
With 11,500 PSI tensile strength, 33lb puncture resistance, and >40db EMI attenuation, this bag offers great protection for your items. Tested to meet or exceed certain electrical and physical requirements of ANSI/ESD S541 and to be ANSI/ESD S20.20 compliant. Bag is ROHS compliant and lead-free.
This aluminized moisture barrier bag is designed to provide a static safe environment for sensitive electronic devices. A stronger polyester layer (Heavy Gauge) helps prevent sharp objects from puncturing and destroying the effectiveness of the bag. The bags are heat sealable and suitable for vacuum packaging.
– 2 Aluminum metal layers in this 5-layer bag provide maximum EMP bag protection
– 33 lb puncture resistance (FTMS 101-C, 2065.1)
– >40 dB EMI Attenuation (MIL-PFR-81705-REV.D)
– Surface Resistivity 12 Ohms / Sq. In. (ASTM 1-257)
– 7 mil Thickness (MIL-STD-3010C Method 1003)
– Moisture Barrier (MIL-STD-3010C Method 3030)
Heat Sealing Conditions:
– Temperature (400 degrees F, 204 degrees C)
– Time (.6 to 4.5 seconds)
– Pressure (30 – 70 PSI, 206-482 KPa)
|
