TT Raincover M

DESCRIPTION:

The TT Raincover is a durable protective rain cover for small backpacks and daypacks. Made of waterproof T-Tex Cover is not only for wet conditions. It protects your load from rain, dust and debris and features a sewn-on stuff bag. It includes a sewn-on stuff bag. Comes in four sizes.

VOLUME
SM 30-40 Liters | 1,830-2,441 Cubic Inches
MD 40-55 Liters | 2,441-3,356 Cubic Inches
LG 55-80 Liters | 3,356-4,882 Cubic Inches
XL <100 Liters | <6,102 Cubic Inches

WEIGHT
SM 3oz | 80g
MD 4oz | 115g
LG 6oz | 180g
XL 8oz | 230g

FEATURES:

• Durable protective rain cover for backpacks and daypacks
• Made with T-Cover Tex a waterproof fabric
• Not only for wet conditions, it protects your load from rain, dust and debris
• It includes a sewn-on stuff bag
• Hook-and-loop patch on front

MATERIAL

T-Cover Tex

The reflector glows after the light turns off so it's easy to find in the night.

Specifications:

• Length: 2.65" 
• Diameter: .57" 
• Stainless Steel Pocket Clip ( Easy to clip onto a hat, MOLLE gear or shirt pocket )
• Glow In the Dark Built In reflector ( Easy to find in the dark )
• LED Type: Cree G2 Emitter ( High Output ) with a life span up to 50,000 hours. 
• Flashlight body is machined of solid billet C360 Free Machining Brass ( Buttery Smooth )
• Stainless Steel ring around the dome lens for added durability
• The dome lens has been treated with an AR (Anti-Reflective) coating.
• Proprietary circuit design features reverse polarity protection and runs off of one AAA battery that provides 3 levels of brightness ( Medium / Low/ High ).

Using a single Duracell AAA battery we got the following results:

• Low Mode, 5 lumen output for up to 60 Hours ( Diffused Light )
• Medium Mode, 48 lumen output for up to 4 Hours
• High Mode, 160 lumen output for up to 75 Minutes

The Flat Gate Clip can be used to keep your everyday carry gear organized and ready for rapid deployment. The Flat Gate Clip is Water Jet cut and is truly made to last and can be used to carry any small preppers paraphernalia you may have.

Specifications:

       Small 20 mm x 9.25mm x 3mm ( 3.2 Grams )
       Medium 26mm x 12mm x 3mm ( 5.1 Grams )
       Large 33mm x 15mm x 4 mm ( 7 Grams )

• Made from 300 series stainless steel

IMPORTANT : This is not a life safety device.

385 Lumens!!! New even flow beam

Glow O-ring Around The Reflector ( easy to find in the dark )

Black Powder Coat Pocket Rotating Pocket Clip

The light is straightforward to use and has friendly ergonomics. The Maratac AAAx2 Extreme features an advance Cree XP-G2(R5) LED for greater brightness and efficiency.

•  Medium 45 Lumens / Low 5 lumens / High 385 lumens  mode brightness control (Simple 3 mode switching)
• Operation:
  • Press and click the back thumb switch to turn on the light into Medium mode. Lightly press again for Low mode and once more for High. Press and click anytime to turn the light off.

SPECIFICATIONS:

• 22.8 grams or .8 oz (without battery)
• 5.0" O.A.L. x .58" inch width
• Type 3 Military Grade Anodizing ( Matte Finish )
• Utilizes 2 Standard AAA Batteries ( 1.2-1.7 Volts each )
• Standard Modes ( Pressing Tail Cap Through Modes )
• • Medium ( 6 Hours )
  • Low ( 90 hours )
  • High ( 1.65 hours )

Proudly U.S.A Made!

When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, we offered these as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from our government order.

Proudly U.S.A Made!

When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, this was offered as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from government order.