| Content | Companion is used in a huge variety of situations by a range of users: bush crafters, hunters and outdoor enthusiasts have all discovered the charm of this knife. The blade is made of Swedish stainless steel, which makes it easy to maintain and keeps the blade sharper for longer. It has a soft friction grip handle made of TPE rubber, which makes the grip safer and more steady to work with. The polymer knife sheath includes a practical belt clip so that the knife can be attached to your rucksack or belt – always close at hand.
The Morakniv Companion Fixed-Blade Outdoor Knife is an all-in-one knife for outdoor enthusiasts, ideal for carving, food prep, and cutting tinder and wood. Featuring a high quality Swedish three-quarter tang hardened Sandvik 12C27 stainless steel or carbon steel blade. A patterned, high-friction grip sits comfortably in the hand, for greater control, safety, and performance, especially in wet and cold conditions. A must-have knife for camping, hiking, hunting, fishing, and survival/emergency preparedness.
| Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, this was offered as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from government order.
| The Flat Gate Clip can be used to keep your everyday carry gear organized and ready for rapid deployment. The Flat Gate Clip is Water Jet cut and is truly made to last and can be used to carry any small preppers paraphernalia you may have.
Specifications:
Small 20 mm x 9.25mm x 3mm ( 3.2 Grams )
Medium 26mm x 12mm x 3mm ( 5.1 Grams )
Large 33mm x 15mm x 4 mm ( 7 Grams )
- Made from 300 series stainless steel
IMPORTANT : This is not a life safety device.
| Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, this was offered as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from government order.
| Use the charging C360 Free Machining Brass ( Buttery Smooth ) head to charge the light and you're all set to keep on trekking.
Can be charged from work, home, laptop, USB Battery pack....
Specifications:
- Length: 1.29" Diameter: .52" Weight: 9.9 Grams
- Battery weight 3.4 Grams
- Comes with extra o-rings
- LED Type: Cree XP-G2 S4 with a life span up to 50,000 hours. ( Newest & Brightest Emitter )
- Orange Peel Reflector for a smooth even beam
- Recharge Time is 35-55 minutes
- The reflector is aluminum alloy.
- Flashlight body is made of C360 Free Machining Brass ( Buttery Smooth )
- Battery is 10180 Lithium Cell 70mAh
- The lens has been treated with a AR (Anti-Reflective) coating.
- Its proprietary circuit design features reverse polarity protection and runs off of one 10180 battery that provides 2 levels of brightness (Low / High).
- Twist on for Low
- Twist 1/2 turn more for High
Using a single 10180 battery we got the following results:
-
Low mode, 12 lumens output for up to 6 hours
-
High mode, 145 lumens output for up to 25 minutes
Includes Complete Kit:
1x Lithium Rechargable Battery
1x USB Charging Cable
1x Charging SS Head With Charge indicator
1x Peanut Light C360 Solid Brass Head & Body
5x Spare O-Rings | The Hults Bruk Tarnaby is a small, all-purpose hatchet for basic uses such as making kindling, doing light clearing and working in the garden.
This item has an axe head weight of 1.25 Lbs and a handle length of 15 inches. The head is the product of blasted and clear-lacquered ironwork and the curved shaft is made of US-sourced hickory. The handle is treated with linseed oil.
- This axe head is hand-forged and made from Swedish axe steel in a foundry that has been in operation since 1697.
- As part of the production process, the steel is struck multiple times thereby increasing its density and resulting in more durability of the axe.
- The head is constructed in such a way that there is a tempered zone designed to hold a very sharp edge even after many sharpenings.
- Each axe comes with a traditional leather protective sheath that is embellished with some unique Swedish decorative elements. The axe is shipped in its own storage box and comes with a detailed users manual.
Features
- Hand-forged and made from Swedish axe steel in a foundry that has been in operation since 1697
- As part of the production process, the steel is struck multiple times, increasing its density and resulting in more durability
- Tempered zone in the head is designed to hold a very sharp edge even after many sharpenings
- Head is the product of blasted and clear-lacquered ironwork
- 15 in. curved shaft is made of U.S.-sourced hickory and treated with linseed oil
- Each axe comes with a traditional leather protective sheath that is embellished with some unique Swedish decorative elements
- Axe head weight of 1.25 lbs.
- Detailed user manual also included
|
