Maratac Titanium Nichia Flashlight

Check Out This AA Powerhouse 

New Nichia 219 Emitter - True Color - Natural Light 

Rev 2 Features :

• Glow in the dark diffuser
• Nichia 219 with a life span up to 50,000 hours. ( Newest & Brightest Emitter )
• Glow in the Dark front o-ring around reflector
• Stronger Clip
• Deep Orange Peel Reflector ( tighter, brighter beam )
• Comes with Silicon Diffuser
• Slightly larger keychain hook for larger cordage

Specifications: 

• Length: 2.99"
• Diameter: .70"
• Weight - 26.2 grams with clip
• LED Type: Nichia 219BT - Whiter / True Color - Neutral White - Cool with a life span up to 50,000 hours. Newest & Brightest Emitter 
• The reflector is aluminum alloy.
• Flashlight body is made of solid billet Titanium Grade 5.
• The lens has been treated with an AR (Anti-Reflective) coating.
• Its proprietary circuit design features reverse polarity protection and runs off of one AA battery that provides 3 levels of brightness ( Low / Medium / High ).

Using A Single Duracell AA battery we got the following results:

• Low Mode, 5 lumen output for 75 Hours
• Medium Mode, 50 lumen output for 4.5 Hours
• High Mode, 235 lumen output for 75 Minutes

A Note From The Legal Department: We do not recommend the use of 14500 Rechargeable batteries with this flashlight unless its an Eneloop Cell. It is designed to use off the shelf alkaline, lithium, NiMH or Nicad AA batteries. We do not recommend use of higher voltage batteries. Any attempt to modify these lights will void the warranty. We know when you try to remove the Pill.

Proudly U.S.A Made!

When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, we offered these as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from our government order.

EOD Robotics developed this compact breaching tool with input from Bomb Techs, SWAT Operators and Patrol Officers. All these folks need a tool for prying, cutting and pounding, and here's the answer.

Specifications:

• Made from 1045 high carbon steel and fully heat treated to a Rockwell hardness of over 45.
• The EOD Robotics Breacher Bar & CERT Bar come ready to go as a pry bar or lever. Ideal for opening crates and even punching through steel drums etc. The coffin corner back edge lends itself to a hammer nicely.
• The 2 inner holes in the handle can be for paracord or solid slabs or whatever you like. The hole towards the top of the blade and the one on the end are good for lashing it onto a shaft, tree branch etc. The end hole is geared for hanging it up or for attaching a lanyard so you do not lose it in that pit or in the water.
• The top edge can be hammered on as can the back end. And then you can use your imagination to do other things with it. (Makes a good wood chisel too!).
• Bars do not come with cord wrapped handles. You will receive the metal bar. The rest is up to you.
• Not pretty, but pretty handy. These were bulk packed for shipment to the military so they may have some rub marks where they have rubbed together in transit.
• Made in USA

Here's What Our Over-Protective Legal Department Has To Say:
Although the EOD Breacher Tool was developed and designed to enter the real world of urban combat, and with a little work with a file, belt sander, grinder, stone or a rock to it could be sharpened and converted to a Deadly stabbing or slashing instrument we can't recommend it. Likewise, the flat on the handle end should not be used as a skull or rib crusher or for performing other blunt trauma. Sorry these are not returnable. Be safe, and don't play with matches or run with scissors.

Proudly U.S.A Made!

When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, we offered these as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from our government order.

Proudly U.S.A Made!

When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, this was offered as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from government order.

Spare Steel Pocket Clip

This clip can be attached to a triple AAA flashlight, and can be easily clipped onto a hat, jeans, t-shirt, or anywhere else you have as a spot to carry your flashlight.