Gadsden Flags

Flag Zone Nylon Gadsden Flag 3ftx5ft Dura Waves nylon, screen dyed. Finished with polyester heading and brass grommets.

Use the charging C360 Free Machining Brass ( Buttery Smooth ) head to charge the light and you're all set to keep on trekking.

Can be charged from work, home, laptop, USB Battery pack....

Specifications: 

• Length: 1.29" Diameter: .52" Weight: 9.9 Grams 
• Battery weight 3.4 Grams
• Comes with extra o-rings
• LED Type: Cree XP-G2 S4 with a life span up to 50,000 hours. ( Newest & Brightest Emitter )
• Orange Peel Reflector for a smooth even beam
• Recharge Time is 35-55 minutes 
• The reflector is aluminum alloy.
• Flashlight body is made of C360 Free Machining Brass ( Buttery Smooth )
• Battery is 10180 Lithium Cell 70mAh
• The lens has been treated with a AR (Anti-Reflective) coating.
• Its proprietary circuit design features reverse polarity protection and runs off of one 10180 battery that provides 2 levels of brightness (Low / High).
  • Twist on for Low
  • Twist 1/2 turn more for High

Using a single 10180 battery we got the following results:

• Low mode, 12 lumens output for up to 6 hours

• High mode, 145 lumens output for up to 25 minutes

Includes Complete Kit:

1x Lithium Rechargable Battery
1x USB Charging Cable 
1x Charging SS Head With Charge indicator
1x Peanut Light C360 Solid Brass Head & Body
5x Spare O-Rings

The Hults Bruk Tarnaby is a small, all-purpose hatchet for basic uses such as making kindling, doing light clearing and working in the garden.

This item has an axe head weight of 1.25 Lbs and a handle length of 15 inches. The head is the product of blasted and clear-lacquered ironwork and the curved shaft is made of US-sourced hickory. The handle is treated with linseed oil.

• This axe head is hand-forged and made from Swedish axe steel in a foundry that has been in operation since 1697.
• As part of the production process, the steel is struck multiple times thereby increasing its density and resulting in more durability of the axe.
• The head is constructed in such a way that there is a tempered zone designed to hold a very sharp edge even after many sharpenings.
• Each axe comes with a traditional leather protective sheath that is embellished with some unique Swedish decorative elements. The axe is shipped in its own storage box and comes with a detailed users manual.

Features

This item has a bit of mystery around it. The original government use for it is unknown. Keep one in your car, home and work.  Brand new, never used, overrun from government contract.

What will you use your A/B Cache for?

Possible uses include:

• Geo-Caching
• Pet Identification
• Emergency Cash Stash
• Water Purification Tablets
• Pill Storage.
• Jacket Zipper Pull

Specification:

• Overall Length: 56.5mm or 2.225"
• External Diameter: 16mm or .63"
• Internal Opening: 11.4mm or .45"
• Internal Depth Side A : 16mm or .63"
• Internal Depth Side B : 18mm or .71"
• Lid is secured via flange to cap seal (Internal o-ring)
• U.S. Made

Use responsibly and due to the nature of this item, it is not returnable for obvious sanitation reasons.

Always wash your container with hot water and mild soap for ensured sanitation.

While the original government use is unknown, the A/B Cache dual compartment capsule offers an extremely compact storage option for your EDC needs. Water tight on both ends and offering 2 different size containers from each end this is a highly versatile storage container. This version is solid stainless steel.

Brand new, direct from Maratac, USA.

EOD Robotics developed this compact breaching tool with input from Bomb Techs, SWAT Operators and Patrol Officers. All these folks need a tool for prying, cutting and pounding, and here's the answer.

Specifications:

• Made from 1045 high carbon steel and fully heat treated to a Rockwell hardness of over 45.
• The EOD Robotics Breacher Bar & CERT Bar come ready to go as a pry bar or lever. Ideal for opening crates and even punching through steel drums etc. The coffin corner back edge lends itself to a hammer nicely.
• The 2 inner holes in the handle can be for paracord or solid slabs or whatever you like. The hole towards the top of the blade and the one on the end are good for lashing it onto a shaft, tree branch etc. The end hole is geared for hanging it up or for attaching a lanyard so you do not lose it in that pit or in the water.
• The top edge can be hammered on as can the back end. And then you can use your imagination to do other things with it. (Makes a good wood chisel too!).
• Bars do not come with cord wrapped handles. You will receive the metal bar. The rest is up to you.
• Not pretty, but pretty handy. These were bulk packed for shipment to the military so they may have some rub marks where they have rubbed together in transit.
• Made in USA

Here's What Our Over-Protective Legal Department Has To Say:
Although the EOD Breacher Tool was developed and designed to enter the real world of urban combat, and with a little work with a file, belt sander, grinder, stone or a rock to it could be sharpened and converted to a Deadly stabbing or slashing instrument we can't recommend it. Likewise, the flat on the handle end should not be used as a skull or rib crusher or for performing other blunt trauma. Sorry these are not returnable. Be safe, and don't play with matches or run with scissors.