C. Crane Solar battery charger – with USB

The C. Crane SBC universal solar-powered battery charger lets you charge your rechargeable batteries with the sun. It holds two rechargeable batteries of the same type and size (D, C, AA, AAA, and Prismatic) and delivers about 150mA and about 5 volts.

The C. Crane SBC universal solar-powered battery charger features a built-in stand on the bottom of the charger. This can be adjusted so allow the charger to point toward the sun for maximum battery charge rate. The meter on the top shows you the current output from the solar panel. A diode is used to block current when there is no sun so the batteries stay charged. Harness the power of the sun with the C. Crane SBC universal solar-powered battery charger.

Key Features

• Convenient for extended power outages and outdoor activities
• Charges rechargeable D, C, AA, AAA, and seven sizes of prismatic batteries
• Holds and charges up to two batteries of a particular size/type at a time

Specifications:

Features of Surefire Defender E2D Emergency Flashlight E2DLU-A:

• Virtually indestructible LED emitter regulated to maximize output and runtime.
• Two output levels-high for maximum light, low for extended runtime.
• TIR lens produces tight beam with enough surround light for peripheral vision.
• Strike Bezel and scalloped tailcap provide personal defense options.
• Coated tempered window resists impact, maximizes light.
• Pocket clip allows head-up or head-down carry in your pocket or in your bag.
• Dual-output tailcap click switch-press for momentary-on high, click for constant-on high, return to off then press or click again to select low.
• High-strength aerospace aluminum body, Mil-Spec hard-anodized for extreme durability.
• Weatherproof O-ring and gasket sealing.
• Includes high-energy 123A batteries with 10-year shelf life.
• Backed by SureFire's No Hassle Guarantee.

EOD Robotics developed this compact breaching tool with input from Bomb Techs, SWAT Operators and Patrol Officers. All these folks need a tool for prying, cutting and pounding, and here's the answer.

Specifications:

• Made from 1045 high carbon steel and fully heat treated to a Rockwell hardness of over 45.
• The EOD Robotics Breacher Bar & CERT Bar come ready to go as a pry bar or lever. Ideal for opening crates and even punching through steel drums etc. The coffin corner back edge lends itself to a hammer nicely.
• The 2 inner holes in the handle can be for paracord or solid slabs or whatever you like. The hole towards the top of the blade and the one on the end are good for lashing it onto a shaft, tree branch etc. The end hole is geared for hanging it up or for attaching a lanyard so you do not lose it in that pit or in the water.
• The top edge can be hammered on as can the back end. And then you can use your imagination to do other things with it. (Makes a good wood chisel too!).
• Bars do not come with cord wrapped handles. You will receive the metal bar. The rest is up to you.
• Not pretty, but pretty handy. These were bulk packed for shipment to the military so they may have some rub marks where they have rubbed together in transit.
• Made in USA

Here's What Our Over-Protective Legal Department Has To Say:
Although the EOD Breacher Tool was developed and designed to enter the real world of urban combat, and with a little work with a file, belt sander, grinder, stone or a rock to it could be sharpened and converted to a Deadly stabbing or slashing instrument we can't recommend it. Likewise, the flat on the handle end should not be used as a skull or rib crusher or for performing other blunt trauma. Sorry these are not returnable. Be safe, and don't play with matches or run with scissors.

(US Government Model)

NSN: 3740-01-474-7377 
When Uncle Sam wanted tweezers for tick and splinter removal, these are the ones they chose.

What makes these so special: Most tweezers are made by spot-welding two pieces of metal together, These tweezers are crafted from a single piece of spring tempered stainless steel or spring titanium.The wide hinge area assures perfect alignment, and the points are hand dressed to exacting specifications. The included tip protector also provides for easy carrying on your key ring or hanging next to your dog tags.

Countless Other Uses:

• Tick removal, home, garden, kitchen, bath, shop, auto, boat, tool box, first aid, hobbies, arts & crafts, fishing, sewing, needlework, removing stitches, hair removal, cosmetics, desk, school, office, pocket/purse, laboratory & medical instrument, splinter & sliver removal

Stainless Steel and Black Passivated Stainless Steel:

Most tweezers are made by spot-welding two pieces of metal together, These tweezers are crafted from a single piece of spring tempered stainless steel. 

Specs:

• 2.5" x 0.5" x 0.25"
• (6.3 cm x 13 cm x 6 cm)

The Hults Bruk Torneo is a compact felling axe intended for bringing down or cutting up small to medium sized trees.

This item has an axe head weight of 1.75 Lbs and a handle length of 26 inches. The head is the product of blasted and clear-lacquered ironwork and the curved shaft is made of US-sourced hickory. That handle is treated with linseed oil.

• This axe head is hand-forged and made from Swedish axe steel in a foundry that has been in operation since 1697.
• As part of the production process, the steel is struck multiple times thereby increasing its density and resulting in more durability of the axe.
• The head is constructed in such a way that there is a tempered zone designed to hold a very sharp edge even after many sharpenings.
• Each axe comes with a traditional leather protective sheath that is embellished with some unique Swedish decorative elements. The axe is shipped in its own storage box and comes with a detailed users manual.

The Hults Bruk Akka Forester's Axe is a perfect companion for the wilderness and clearing forest trails.

The Akka features a long, curved 24" American hickory handle paired with a 1.5 lb. axe head for exceptional leverage and power in a lightweight package. The straight knife-ground edge and finger notch near the neck make carving tasks a joy. With a total weight of just 2.2 lbs. the Akka is is ideal for overnight wilderness trips and fantastic for clearing forest trails.

• The axe head is hand-forged and made from Swedish axe steel in a foundry that has been in operation since 1697.
• As part of the hand grinding production process, the steel is struck multiple times thereby increasing its density and resulting in more durability of the axe.
• The head is constructed in such a way that there is a tempered zone designed to hold a very sharp edge even after many sharpenings.
• The straight hickory handle is treated with linseed oil.
• Each axe comes with a traditional leather protective sheath that is embellished with some unique Swedish decorative elements. (Replacement sheaths are available) The axe is shipped in its own storage box and comes with a detailed users manual.

Product Specs

Overall Weight: 2.2 lbs.

Head Weight: 1.5 lbs.

Handle Length: 24"

Head: Solid Swedish steel

Handle: Solid American Hickory