| Content | This axe is a backpacker's delight, and great for splitting kindling! It is small enough for carrying, yet big enough to get you the firewood you need. Individually hardened in Snow and Nealley's workshop for strength, this axe will be by your side for years to come. Features Snow and Nealley's best-selling 1-3/4 lb. Hudson Bay head fitted to a knobbed 18" select American hickory handle. The shorter handle allows one-handed use. Genuine leather blade guard is included.
The Penobscot Bay Kindling Axe is forged, tempered, ground, and assembled in the USA of US materials.
Dimensions
- Overall Length: 17-1/8"
- Cutting Edge, Heel to Toe: 3-7/8"
- Head Length, Butt to Cutting Edge: 6-11/16"
- Butt: 1-3/4" X 7/8"
- Overall Weight (without guard): 2 lb. 8.8 oz.
What to expect when you receive your new axe
All Snow and Nealley axes are hand-assembled and finished in a small craftsman's shop. You can expect the grain of the axe handle and the texture of the leather guard to vary from the picture in this listing. In addition, there may be slight variations in the finish on the head.
Snow and Nealley gives each axe head a clearcoat finish to prevent rust during shipping. The finish will come off during sharpening and use. This is normal.
Axe heads are hand-tempered and hand-ground. They are shipped sharp enough to cut, but without the final edge that many users will prefer. You may add the final touches according to your preference with a file, grinding stone, or grinding wheel.
| Use the charging C360 Free Machining Brass ( Buttery Smooth ) head to charge the light and you're all set to keep on trekking.
Can be charged from work, home, laptop, USB Battery pack....
Specifications:
- Length: 1.6" Diameter: .74" Weight: 27.8 Grams - No Battery
- Battery weight 9 Grams
- Comes with extra o-rings
- LED Type: Cree XP-G2 S4 with a life span up to 50,000 hours. ( Newest & Brightest Emitter )
- Orange Peel Reflector for a smooth even beam
- Recharge Time is 30-100 minutes - depending on charge rate source
- The reflector is aluminum alloy.
- Flashlight body is made of C360 Free Machining Brass ( Buttery Smooth )
- Battery is 14250 Lithium Cell 280mAh
- The lens has been treated with a AR (Anti-Reflective) coating.
- Its proprietary circuit design features reverse polarity protection and runs off of one 14250 battery that provides 2 levels of brightness (Low / High).
- Twist on for Low
- Twist 1/2 turn more for High
Using a single 14250 battery we got the following results:
-
Low mode, 15 lumens output for up to 9 hours
-
High mode, 305 lumens output for up to 40 minutes
Includes Complete Kit:
1x Lithium Rechargable Battery
1x USB Charging Cable
1x Charging SS Head With Charge indicator
1x PCL Light C360 Solid Brass Head & Body
4x Spare O-Rings | Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, we offered these as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from our government order.
| The Flat Gate Clip can be used to keep your everyday carry gear organized and ready for rapid deployment. The Flat Gate Clip is Water Jet cut and is truly made to last and can be used to carry any small preppers paraphernalia you may have.
Specifications:
Small 20 mm x 9.25mm x 3mm ( 3.2 Grams )
Medium 26mm x 12mm x 3mm ( 5.1 Grams )
Large 33mm x 15mm x 4 mm ( 7 Grams )
- Made from 300 series stainless steel
IMPORTANT : This is not a life safety device.
| Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, this was offered as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from government order.
| The Hults Bruk Torneo is a compact felling axe intended for bringing down or cutting up small to medium sized trees.
This item has an axe head weight of 1.75 Lbs and a handle length of 26 inches. The head is the product of blasted and clear-lacquered ironwork and the curved shaft is made of US-sourced hickory. That handle is treated with linseed oil.
- This axe head is hand-forged and made from Swedish axe steel in a foundry that has been in operation since 1697.
- As part of the production process, the steel is struck multiple times thereby increasing its density and resulting in more durability of the axe.
- The head is constructed in such a way that there is a tempered zone designed to hold a very sharp edge even after many sharpenings.
- Each axe comes with a traditional leather protective sheath that is embellished with some unique Swedish decorative elements. The axe is shipped in its own storage box and comes with a detailed users manual.
|
