| Content | This axe is a backpacker's delight, and great for splitting kindling! It is small enough for carrying, yet big enough to get you the firewood you need. Individually hardened in Snow and Nealley's workshop for strength, this axe will be by your side for years to come. Features Snow and Nealley's best-selling 1-3/4 lb. Hudson Bay head fitted to a knobbed 18" select American hickory handle. The shorter handle allows one-handed use. Genuine leather blade guard is included.
The Penobscot Bay Kindling Axe is forged, tempered, ground, and assembled in the USA of US materials.
Dimensions
- Overall Length: 17-1/8"
- Cutting Edge, Heel to Toe: 3-7/8"
- Head Length, Butt to Cutting Edge: 6-11/16"
- Butt: 1-3/4" X 7/8"
- Overall Weight (without guard): 2 lb. 8.8 oz.
What to expect when you receive your new axe
All Snow and Nealley axes are hand-assembled and finished in a small craftsman's shop. You can expect the grain of the axe handle and the texture of the leather guard to vary from the picture in this listing. In addition, there may be slight variations in the finish on the head.
Snow and Nealley gives each axe head a clearcoat finish to prevent rust during shipping. The finish will come off during sharpening and use. This is normal.
Axe heads are hand-tempered and hand-ground. They are shipped sharp enough to cut, but without the final edge that many users will prefer. You may add the final touches according to your preference with a file, grinding stone, or grinding wheel.
| The possibilities are endless of what this tool can carry! AA battery, geo-caching, pet identification, emergency cash stash, water purification tablets storm proof matches, cotton balls for fire starting, pills, needle, thread, etc. One side of the Tube-A-Ton is a battery locker which fits AA batteries perfectly. Brand new, never used overrun from government contract. Each side has a tight o-ring seal to prevent exposure to moisture in the toughest conditions. Has large loop hole for attaching lanyards and split rings for EDC (Every Day Carry).
Tube-A-Ton fits a AA on each side !
The possibilities are endless!
TITANIUM MODEL SPECS
Overall length: 159.00 mm or 6.17
External diameter: 19.00 mm or .75"
Internal opening: 14.45 mm or .57"
Internal depth: 49.00 mm or 1.95" & 69.2 mm or 2.72"
Lid is secured via flange to cap seal (internal o-ring)
Titanium : 6AL-4V
Weight :102.5 Grams
| | The reflector glows after the light turns off so it's easy to find in the night.
Specifications:
- Length: 2.65"
- Diameter: .57"
- Stainless Steel Pocket Clip ( Easy to clip onto a hat, MOLLE gear or shirt pocket )
- Glow In the Dark Built In reflector ( Easy to find in the dark )
- LED Type: Cree G2 Emitter ( High Output ) with a life span up to 50,000 hours.
- Flashlight body is machined of solid billet C360 Free Machining Brass ( Buttery Smooth )
- Stainless Steel ring around the dome lens for added durability
- The dome lens has been treated with an AR (Anti-Reflective) coating.
- Proprietary circuit design features reverse polarity protection and runs off of one AAA battery that provides 3 levels of brightness ( Medium / Low/ High ).
Using a single Duracell AAA battery we got the following results:
- Low Mode, 5 lumen output for up to 60 Hours ( Diffused Light )
- Medium Mode, 48 lumen output for up to 4 Hours
- High Mode, 160 lumen output for up to 75 Minutes
| Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, this was offered as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from government order.
| Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, we offered these as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from our government order.
|
