| Content | COMPASS, MAGNETIC, UNMOUNTED: WRIST
NSN: Pending
S.E.R.E. Compass (Compass, Magnetic, Unmounted)
These compact compasses are usually seen in Aircrew Survival Kits and seldom seen by the public. This production run was delivered last month and we were fortunate enough to get some of the extras.
Specifications:
- Overall Height: 0.213 inches nominal
- Overall Diameter: 0.75 inches nominal
- Case Material: Machined Brass
- Crystal Type: Acrylic
- Instrument Type: DRY (will not freeze or develop bubbles)
- Diameter: 0.750 inches nominal
- Inscription: Degrees
- Graduation Range: +0.0/+360.0
- Smallest Increment: 22.5 degrees
Special Features : Din sealed brass case; threaded with 45 lb braided nylon fish line;
compass card has prominent luminious paint markings.
Limited Introduction From Surplus
| Use the charging C360 Free Machining Brass ( Buttery Smooth ) head to charge the light and you're all set to keep on trekking.
Can be charged from work, home, laptop, USB Battery pack....
Specifications:
- Length: 1.29" Diameter: .52" Weight: 9.9 Grams
- Battery weight 3.4 Grams
- Comes with extra o-rings
- LED Type: Cree XP-G2 S4 with a life span up to 50,000 hours. ( Newest & Brightest Emitter )
- Orange Peel Reflector for a smooth even beam
- Recharge Time is 35-55 minutes
- The reflector is aluminum alloy.
- Flashlight body is made of C360 Free Machining Brass ( Buttery Smooth )
- Battery is 10180 Lithium Cell 70mAh
- The lens has been treated with a AR (Anti-Reflective) coating.
- Its proprietary circuit design features reverse polarity protection and runs off of one 10180 battery that provides 2 levels of brightness (Low / High).
- Twist on for Low
- Twist 1/2 turn more for High
Using a single 10180 battery we got the following results:
-
Low mode, 12 lumens output for up to 6 hours
-
High mode, 145 lumens output for up to 25 minutes
Includes Complete Kit:
1x Lithium Rechargable Battery
1x USB Charging Cable
1x Charging SS Head With Charge indicator
1x Peanut Light C360 Solid Brass Head & Body
5x Spare O-Rings | Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, we offered these as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from our government order.
| Spare Steel Pocket Clip
This clip can be attached to a triple AAA flashlight, and can be easily clipped onto a hat, jeans, t-shirt, or anywhere else you have as a spot to carry your flashlight. | Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, this was offered as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from government order.
| The Flat Gate Clip can be used to keep your everyday carry gear organized and ready for rapid deployment. The Flat Gate Clip is Water Jet cut and is truly made to last and can be used to carry any small preppers paraphernalia you may have.
Specifications:
Small 20 mm x 9.25mm x 3mm ( 3.2 Grams )
Medium 26mm x 12mm x 3mm ( 5.1 Grams )
Large 33mm x 15mm x 4 mm ( 7 Grams )
- Made from 300 series stainless steel
IMPORTANT : This is not a life safety device.
|
