Content | These 5.3-gallon leak-proof cans come directly from Wavian, the factory that has supplied many NATO countries for over 75 years, and are the highest quality fuel cans on the market today. Rigorously tested, they boast a number of features, including 0.9 mm steel walls, an interior rust-proof Rezol lining, internal breather pipe for splash-proof pouring, a three handle configuration for easy carrying, a Leak-proof bayonet closure, and a locking pin for the cap. Wavian currently produces the only EPA, CARB, and DOT approved steel fuel cans that are 100% legal in all 50 US states. Includes spout and an adapter for vehicles with smaller filler receivers.
Can Features:
- Made out of 0.9mm cold rolled steel.
- Unique wide channel breather and smooth pouring spout.
- Lined to prevent rusting with a petrol, water, and alcohol resistant coating.
- The cap has a locking pin (international patent) to ensure it cannot be opened accidentally.
- The bayonet closure is completely leak-proof with the can in any position.
- Three-handle configuration for easy grabbing and carrying of multiple cans.
- Manufactured and tested to comply with Australian Standards – AS2906, Swedish Standards – SP, German Standards – TUV/GS, and UN Dangerous Goods.
- EPA and CARB certified, built to ASMT, NFPA, and DOT standards.Â
- OSHA compliant.
- Approved and fully legal for sale in all 50 states.
Spout Features:
- Works on all gasoline vehicles with included adapter.
- Works on all diesel and equipment tanks.
- Fast flow rate.
- Leak-proof.
Dimensions
(L x W x H): 6½ x 13½  x 18½
Weight: 12lbs | Use the charging C360 Free Machining Brass ( Buttery Smooth ) head to charge the light and you're all set to keep on trekking.
Can be charged from work, home, laptop, USB Battery pack....
Specifications:
- Length: 1.29" Diameter: .52" Weight: 9.9 Grams
- Battery weight 3.4 Grams
- Comes with extra o-rings
- LED Type: Cree XP-G2 S4 with a life span up to 50,000 hours. ( Newest & Brightest Emitter )
- Orange Peel Reflector for a smooth even beam
- Recharge Time is 35-55 minutes
- The reflector is aluminum alloy.
- Flashlight body is made of C360 Free Machining Brass ( Buttery Smooth )
- Battery is 10180 Lithium Cell 70mAh
- The lens has been treated with a AR (Anti-Reflective) coating.
- Its proprietary circuit design features reverse polarity protection and runs off of one 10180 battery that provides 2 levels of brightness (Low / High).
- Twist on for Low
- Twist 1/2 turn more for High
Using a single 10180 battery we got the following results:
-
Low mode, 12 lumens output for up to 6 hours
-
High mode, 145 lumens output for up to 25 minutes
Includes Complete Kit:
1x Lithium Rechargable Battery 1x USB Charging Cable 1x Charging SS Head With Charge indicator 1x Peanut Light C360 Solid Brass Head & Body 5x Spare O-Rings | Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, we offered these as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from our government order.
| Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, this was offered as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from government order.
| Use the charging C360 Free Machining Brass ( Buttery Smooth ) head to charge the light and you're all set to keep on trekking.
Can be charged from work, home, laptop, USB Battery pack....
Specifications:
- Length: 1.6" Diameter: .74" Weight: 27.8 Grams - No Battery
- Battery weight 9 Grams
- Comes with extra o-rings
- LED Type: Cree XP-G2 S4 with a life span up to 50,000 hours. ( Newest & Brightest Emitter )
- Orange Peel Reflector for a smooth even beam
- Recharge Time is 30-100 minutes - depending on charge rate source
- The reflector is aluminum alloy.
- Flashlight body is made of C360 Free Machining Brass ( Buttery Smooth )
- Battery is 14250 Lithium Cell 280mAh
- The lens has been treated with a AR (Anti-Reflective) coating.
- Its proprietary circuit design features reverse polarity protection and runs off of one 14250 battery that provides 2 levels of brightness (Low / High).
- Twist on for Low
- Twist 1/2 turn more for High
Using a single 14250 battery we got the following results:
-
Low mode, 15 lumens output for up to 9 hours
-
High mode, 305 lumens output for up to 40 minutes
Includes Complete Kit:
1x Lithium Rechargable Battery 1x USB Charging Cable 1x Charging SS Head With Charge indicator 1x PCL Light C360 Solid Brass Head & Body 4x Spare O-Rings | (US Government Model)
NSN: 3740-01-474-7377
When Uncle Sam wanted tweezers for tick and splinter removal, these are the ones they chose.
What makes these so special: Most tweezers are made by spot-welding two pieces of metal together, These tweezers are crafted from a single piece of spring tempered stainless steel or spring titanium.The wide hinge area assures perfect alignment, and the points are hand dressed to exacting specifications. The included tip protector also provides for easy carrying on your key ring or hanging next to your dog tags.
Countless Other Uses:
- Tick removal, home, garden, kitchen, bath, shop, auto, boat, tool box, first aid, hobbies, arts & crafts, fishing, sewing, needlework, removing stitches, hair removal, cosmetics, desk, school, office, pocket/purse, laboratory & medical instrument, splinter & sliver removal
Stainless Steel and Black Passivated Stainless Steel:
Most tweezers are made by spot-welding two pieces of metal together, These tweezers are crafted from a single piece of spring tempered stainless steel.
Specs:
- 2.5" x 0.5" x 0.25"
- (6.3 cm x 13 cm x 6 cm)
|