Content |
DESCRIPTION:
The TT Modular Gunner Pack is a modular military style backpack. The materials used for this deployment pack are very light, making it super easy to handle. It has a flat main compartment that is hydration system compatible and the back of the backpack has MOLLE hook-and-loop for customization. The top front pocket of the backpack is a flip-top where you can can attach magazine holders. Both center front pockets are removable and have MOLLE hook-and-loop surface on the main pack once removed. The backpack has a MOLLE reverse system on the back so you can integrate it into a plate carrier. You can also use an adapter to attach it to plate carriers. Includes 3 detachable MAG pouches to use on the outside for quick release or move to inside the pack for concealment and it includes 4 detachable Pistol MAG pouches.
The TT MODULAR GUNNER PACK received a Score in the 2021 NTOA Member Tested and Recommended Program. Reviewed by law enforcement officers in the National Tactical Officers Association (NTOA), the TT MODULAR GUNNER PACK received an overall score of 3.7 out of 5.
FEATURES:
- Modular military style backpack
- 2 removable and 2 fixed pouches on the front of the pack (4 total)
- Includes 3 detachable MAG pouches to use on the outside for quick release or move to inside the pack for concealment
- Includes 4 detachable Pistol MAG pouches
- 2 interior mesh zippered pockets
- Hook-and-loop MOLLE interior and exterior
- Very Lightweight
- Hydration compatible
- Removable shoulder straps enables the pack to be attached to a Plate Carrier or Chest Rig
- Hook-and-loop patch on front bottom pouch
VOLUME
14 Liters | 854 Cubic Inches
WEIGHT
35oz | 1,000g
DIMENSIONS
17 x 10 x 1.75in | 43 x 26 x 5cm
MATERIAL
T-Square Rip (Multicam 500 den)
TECHNOLOGY
ZIPS
HARDWARE
| EOD Robotics developed this compact breaching tool with input from Bomb Techs, SWAT Operators and Patrol Officers. All these folks need a tool for prying, cutting, pounding, and with extra versatility for shutting off gas valves during emergencies.
Specifications:
- Made from 1045 high carbon steel and fully heat treated to a Rockwell hardness of over 45.
- The EOD Robotics Breacher Bar & CERT Bar come ready to go as a pry bar or lever. Ideal for opening crates and even punching through steel drums etc. The coffin corner back edge lends itself to a hammer nicely.
- The 2 inner holes in the handle can be for paracord or solid slabs or whatever you like. The hole towards the top of the blade and the one on the end are good for lashing it onto a shaft, tree branch etc. The end hole is geared for hanging it up or for attaching a lanyard so you do not lose it in that pit or in the water.
- The top edge can be hammered on as can the back end. And then you can use your imagination to do other things with it. (Makes a good wood chisel too!).
- Bars do not come with cord wrapped handles. You will receive the metal bar. The rest is up to you.
- Not pretty, but pretty handy. These were bulk packed for shipment to the military so they may have some rub marks where they have rubbed together in transit.
- Made in USA
Here's What Our Over-Protective Legal Department Has To Say:
Although the EOD Breacher Tool was developed and designed to enter the real world of urban combat, and with a little work with a file, belt sander, grinder, stone or a rock to it could be sharpened and converted to a Deadly stabbing or slashing instrument we can't recommend it. Likewise, the flat on the handle end should not be used as a skull or rib crusher or for performing other blunt trauma. Sorry these are not returnable. Be safe, and don't play with matches or run with scissors.
| Use the charging C360 Free Machining Brass ( Buttery Smooth ) head to charge the light and you're all set to keep on trekking.
Can be charged from work, home, laptop, USB Battery pack....
Specifications:
- Length: 1.29" Diameter: .52" Weight: 9.9 Grams
- Battery weight 3.4 Grams
- Comes with extra o-rings
- LED Type: Cree XP-G2 S4 with a life span up to 50,000 hours. ( Newest & Brightest Emitter )
- Orange Peel Reflector for a smooth even beam
- Recharge Time is 35-55 minutes
- The reflector is aluminum alloy.
- Flashlight body is made of C360 Free Machining Brass ( Buttery Smooth )
- Battery is 10180 Lithium Cell 70mAh
- The lens has been treated with a AR (Anti-Reflective) coating.
- Its proprietary circuit design features reverse polarity protection and runs off of one 10180 battery that provides 2 levels of brightness (Low / High).
- Twist on for Low
- Twist 1/2 turn more for High
Using a single 10180 battery we got the following results:
-
Low mode, 12 lumens output for up to 6 hours
-
High mode, 145 lumens output for up to 25 minutes
Includes Complete Kit:
1x Lithium Rechargable Battery 1x USB Charging Cable 1x Charging SS Head With Charge indicator 1x Peanut Light C360 Solid Brass Head & Body 5x Spare O-Rings | Specifications:
Power: |
Range 5 - 600 Lumens |
Beam Color: |
White |
Finish: |
Anodized |
Battery Type: |
CR123A |
Bulb Type: |
LED |
Included Accessories: |
2 Batteries 2x123A |
Application: |
Emergency, Self Defense, Tactical |
Color: |
Black |
Weather Resistance: |
Yes |
Design: |
Ergonomic |
Bezel Type: |
Crenelated |
Length: |
5.6 in |
Weight: |
4.2 oz |
Battery Life: |
Range 2.25 - 67.5 hours |
Fabric/Material: |
Aluminium |
Bezel Diameter: |
1.125 in |
Features of Surefire Defender E2D Emergency Flashlight E2DLU-A:
- Virtually indestructible LED emitter regulated to maximize output and runtime.
- Two output levels-high for maximum light, low for extended runtime.
- TIR lens produces tight beam with enough surround light for peripheral vision.
- Strike Bezel and scalloped tailcap provide personal defense options.
- Coated tempered window resists impact, maximizes light.
- Pocket clip allows head-up or head-down carry in your pocket or in your bag.
- Dual-output tailcap click switch-press for momentary-on high, click for constant-on high, return to off then press or click again to select low.
- High-strength aerospace aluminum body, Mil-Spec hard-anodized for extreme durability.
- Weatherproof O-ring and gasket sealing.
- Includes high-energy 123A batteries with 10-year shelf life.
- Backed by SureFire's No Hassle Guarantee.
| The Hults Bruk Aneby is a stout medium sized axe.
A great axe for camping or hunting designed to offer considerable power and leverage in a compact size. Ideally suited for light forest work, splitting smaller firewood and felling smaller sized trees. The Aneby can be comfortably used with one hand or both hands, and features a rounded poll for skinning. This item has an axe head weight of 2 Lbs and a handle length of 20 inches.
- The axe head is hand-forged and made from Swedish axe steel in a foundry that has been in operation since 1697.
- As part of the hand grinding production process, the steel is struck multiple times thereby increasing its density and resulting in more durability of the axe.
- The head is constructed in such a way that there is a tempered zone designed to hold a very sharp edge even after many sharpenings.
- The curved hickory handle is treated with linseed oil.
- Each axe comes with a traditional leather protective sheath. (Replacement sheaths are available) The axe is shipped in its own storage box and comes with a detailed users manual.
| The Hults Bruk Akka Forester's Axe is a perfect companion for the wilderness and clearing forest trails.
The Akka features a long, curved 24" American hickory handle paired with a 1.5 lb. axe head for exceptional leverage and power in a lightweight package. The straight knife-ground edge and finger notch near the neck make carving tasks a joy. With a total weight of just 2.2 lbs. the Akka is is ideal for overnight wilderness trips and fantastic for clearing forest trails.
- The axe head is hand-forged and made from Swedish axe steel in a foundry that has been in operation since 1697.
- As part of the hand grinding production process, the steel is struck multiple times thereby increasing its density and resulting in more durability of the axe.
- The head is constructed in such a way that there is a tempered zone designed to hold a very sharp edge even after many sharpenings.
- The straight hickory handle is treated with linseed oil.
- Each axe comes with a traditional leather protective sheath that is embellished with some unique Swedish decorative elements. (Replacement sheaths are available) The axe is shipped in its own storage box and comes with a detailed users manual.
Product Specs
Overall Weight: 2.2 lbs.
Head Weight: 1.5 lbs.
Handle Length: 24"
Head: Solid Swedish steel
Handle: Solid American Hickory |