| Content |
DESCRIPTION:
Spacious tactical shoulder bag for laptop, files and documents. Front and side areas have laser cut MOLLE to add pouches, etc to customize to your needs. Attachment on the back allows you to attached it to a rolling travel bag/trolley.
FEATURES:
- Detachable, padded shoulder strap
- Extra-durable handle
- Trolley attachment on the back
- Front pocket with useful dividers
- Detachable padded laptop sleeve
- Two large pockets for files
- Laptop compartment for 15.4
- Front and side areas have laser cut MOLLE
VOLUME
18 Liters | 1,098 Cubic Inches
WEIGHT
39oz | 1.10kg
DIMENSIONS
12 x 16 x 7in | 30 x 41 x 17 cm
MATERIAL
CORDURA® 700 den
TECHNOLOGY
FABRIC
ZIPS
HARDWARE
| (US Government Model)
NSN: 3740-01-474-7377
When Uncle Sam wanted tweezers for tick and splinter removal, these are the ones they chose.
What makes these so special: Most tweezers are made by spot-welding two pieces of metal together, These tweezers are crafted from a single piece of spring tempered stainless steel or spring titanium.The wide hinge area assures perfect alignment, and the points are hand dressed to exacting specifications. The included tip protector also provides for easy carrying on your key ring or hanging next to your dog tags.
Countless Other Uses:
- Tick removal, home, garden, kitchen, bath, shop, auto, boat, tool box, first aid, hobbies, arts & crafts, fishing, sewing, needlework, removing stitches, hair removal, cosmetics, desk, school, office, pocket/purse, laboratory & medical instrument, splinter & sliver removal
Stainless Steel and Black Passivated Stainless Steel:
Most tweezers are made by spot-welding two pieces of metal together, These tweezers are crafted from a single piece of spring tempered stainless steel.
Specs:
- 2.5" x 0.5" x 0.25"
- (6.3 cm x 13 cm x 6 cm)
| The Flat Gate Clip can be used to keep your everyday carry gear organized and ready for rapid deployment. The Flat Gate Clip is Water Jet cut and is truly made to last and can be used to carry any small preppers paraphernalia you may have.
Specifications:
Small 20 mm x 9.25mm x 3mm ( 3.2 Grams )
Medium 26mm x 12mm x 3mm ( 5.1 Grams )
Large 33mm x 15mm x 4 mm ( 7 Grams )
- Made from 300 series stainless steel
IMPORTANT : This is not a life safety device.
| Proudly U.S.A Made!
When Uncle Sam requested a small pocket pry bar for technicians to open ordinance crates in the field, this was offered as the solution. The Widgy Pry Bar is made to fill the high demand for a customizable widgy bar which you can sharpen into your own EDC tool. These compact bars are heat treated D-9 steel and provide a common sense solution to broken knife blades and bent screw driver shafts. These are first run extras from government order.
| Use the charging C360 Free Machining Brass ( Buttery Smooth ) head to charge the light and you're all set to keep on trekking.
Can be charged from work, home, laptop, USB Battery pack....
Specifications:
- Length: 1.6" Diameter: .74" Weight: 27.8 Grams - No Battery
- Battery weight 9 Grams
- Comes with extra o-rings
- LED Type: Cree XP-G2 S4 with a life span up to 50,000 hours. ( Newest & Brightest Emitter )
- Orange Peel Reflector for a smooth even beam
- Recharge Time is 30-100 minutes - depending on charge rate source
- The reflector is aluminum alloy.
- Flashlight body is made of C360 Free Machining Brass ( Buttery Smooth )
- Battery is 14250 Lithium Cell 280mAh
- The lens has been treated with a AR (Anti-Reflective) coating.
- Its proprietary circuit design features reverse polarity protection and runs off of one 14250 battery that provides 2 levels of brightness (Low / High).
- Twist on for Low
- Twist 1/2 turn more for High
Using a single 14250 battery we got the following results:
-
Low mode, 15 lumens output for up to 9 hours
-
High mode, 305 lumens output for up to 40 minutes
Includes Complete Kit:
1x Lithium Rechargable Battery
1x USB Charging Cable
1x Charging SS Head With Charge indicator
1x PCL Light C360 Solid Brass Head & Body
4x Spare O-Rings | Use the charging C360 Free Machining Brass ( Buttery Smooth ) head to charge the light and you're all set to keep on trekking.
Can be charged from work, home, laptop, USB Battery pack....
Specifications:
- Length: 1.29" Diameter: .52" Weight: 9.9 Grams
- Battery weight 3.4 Grams
- Comes with extra o-rings
- LED Type: Cree XP-G2 S4 with a life span up to 50,000 hours. ( Newest & Brightest Emitter )
- Orange Peel Reflector for a smooth even beam
- Recharge Time is 35-55 minutes
- The reflector is aluminum alloy.
- Flashlight body is made of C360 Free Machining Brass ( Buttery Smooth )
- Battery is 10180 Lithium Cell 70mAh
- The lens has been treated with a AR (Anti-Reflective) coating.
- Its proprietary circuit design features reverse polarity protection and runs off of one 10180 battery that provides 2 levels of brightness (Low / High).
- Twist on for Low
- Twist 1/2 turn more for High
Using a single 10180 battery we got the following results:
-
Low mode, 12 lumens output for up to 6 hours
-
High mode, 145 lumens output for up to 25 minutes
Includes Complete Kit:
1x Lithium Rechargable Battery
1x USB Charging Cable
1x Charging SS Head With Charge indicator
1x Peanut Light C360 Solid Brass Head & Body
5x Spare O-Rings |
