CAVESTOCK

Free Standard Shipping for Orders Over $200. Learn More

Availability: In Stock

EOD Robotics Breacher Bar & CERT Bar – Mid Breacher ( Compact )

SKU: 6214457

$34.99

Categories: ,

Description

EOD Robotics developed this compact breaching tool with input from Bomb Techs, SWAT Operators and Patrol Officers. All these folks need a tool for prying, cutting and pounding, and here’s the answer.

Specifications:

  • Made from 1045 high carbon steel and fully heat treated to a Rockwell hardness of over 45.
  • The EOD Robotics Breacher Bar & CERT Bar come ready to go as a pry bar or lever. Ideal for opening crates and even punching through steel drums etc. The coffin corner back edge lends itself to a hammer nicely.
  • The 2 inner holes in the handle can be for paracord or solid slabs or whatever you like. The hole towards the top of the blade and the one on the end are good for lashing it onto a shaft, tree branch etc. The end hole is geared for hanging it up or for attaching a lanyard so you do not lose it in that pit or in the water.
  • The top edge can be hammered on as can the back end. And then you can use your imagination to do other things with it. (Makes a good wood chisel too!).
  • Bars do not come with cord wrapped handles. You will receive the metal bar. The rest is up to you.
  • Not pretty, but pretty handy. These were bulk packed for shipment to the military so they may have some rub marks where they have rubbed together in transit.
  • Made in USA

Here’s What Our Over-Protective Legal Department Has To Say:
Although the EOD Breacher Tool was developed and designed to enter the real world of urban combat, and with a little work with a file, belt sander, grinder, stone or a rock to it could be sharpened and converted to a Deadly stabbing or slashing instrument we can’t recommend it. Likewise, the flat on the handle end should not be used as a skull or rib crusher or for performing other blunt trauma. Sorry these are not returnable. Be safe, and don’t play with matches or run with scissors.

Additional information

Weight 0.1700971386 kg
upc

Quick Comparison

SettingsEOD Robotics Breacher Bar & CERT Bar - Mid Breacher ( Compact ) removeTube-A-Ton Titanium removeBrass Peanut LED Flashlight Kit by Maratac removeEOD Robotics Breacher Bar & CERT Bar - Breacher Bar removeTick Tweezers removeA/B Cache (Dual Compartment Capsule) Brass remove
NameEOD Robotics Breacher Bar & CERT Bar - Mid Breacher ( Compact ) removeTube-A-Ton Titanium removeBrass Peanut LED Flashlight Kit by Maratac removeEOD Robotics Breacher Bar & CERT Bar - Breacher Bar removeTick Tweezers removeA/B Cache (Dual Compartment Capsule) Brass remove
Image
SKU621445764144552214453621437251144566414442
Rating
Price$34.99$146.99$51.99$39.89$12.99$45.99
Stock

1 in stock

0 in stock

0 in stock

Availability1 in stock0 in stock0 in stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

EOD Robotics developed this compact breaching tool with input from Bomb Techs, SWAT Operators and Patrol Officers. All these folks need a tool for prying, cutting and pounding, and here's the answer.

Specifications:

  • Made from 1045 high carbon steel and fully heat treated to a Rockwell hardness of over 45.
  • The EOD Robotics Breacher Bar & CERT Bar come ready to go as a pry bar or lever. Ideal for opening crates and even punching through steel drums etc. The coffin corner back edge lends itself to a hammer nicely.
  • The 2 inner holes in the handle can be for paracord or solid slabs or whatever you like. The hole towards the top of the blade and the one on the end are good for lashing it onto a shaft, tree branch etc. The end hole is geared for hanging it up or for attaching a lanyard so you do not lose it in that pit or in the water.
  • The top edge can be hammered on as can the back end. And then you can use your imagination to do other things with it. (Makes a good wood chisel too!).
  • Bars do not come with cord wrapped handles. You will receive the metal bar. The rest is up to you.
  • Not pretty, but pretty handy. These were bulk packed for shipment to the military so they may have some rub marks where they have rubbed together in transit.
  • Made in USA

Here's What Our Over-Protective Legal Department Has To Say:
Although the EOD Breacher Tool was developed and designed to enter the real world of urban combat, and with a little work with a file, belt sander, grinder, stone or a rock to it could be sharpened and converted to a Deadly stabbing or slashing instrument we can't recommend it. Likewise, the flat on the handle end should not be used as a skull or rib crusher or for performing other blunt trauma. Sorry these are not returnable. Be safe, and don't play with matches or run with scissors.

The possibilities are endless of what this tool can carry! AA battery, geo-caching, pet identification, emergency cash stash, water purification tablets storm proof matches, cotton balls for fire starting, pills, needle, thread, etc. One side of the Tube-A-Ton is a battery locker which fits AA batteries perfectly. Brand new, never used overrun from government contract. Each side has a tight o-ring seal to prevent exposure to moisture in the toughest conditions. Has large loop hole for attaching lanyards and split rings for EDC (Every Day Carry).

Tube-A-Ton fits a AA on each side !

The possibilities are endless!

TITANIUM MODEL SPECS

Overall length: 159.00 mm or 6.17
External diameter: 19.00 mm or .75"
Internal opening: 14.45 mm or .57"
Internal depth: 49.00 mm or 1.95" & 69.2 mm or 2.72"
Lid is secured via flange to cap seal (internal o-ring)

Titanium : 6AL-4V

Weight :102.5 Grams

Use the charging C360 Free Machining Brass ( Buttery Smooth ) head to charge the light and you're all set to keep on trekking.

Can be charged from work, home, laptop, USB Battery pack....

Specifications: 

  • Length: 1.29" Diameter: .52" Weight: 9.9 Grams 
  • Battery weight 3.4 Grams
  • Comes with extra o-rings
  • LED Type: Cree XP-G2 S4 with a life span up to 50,000 hours. ( Newest & Brightest Emitter )
  • Orange Peel Reflector for a smooth even beam
  • Recharge Time is 35-55 minutes 
  • The reflector is aluminum alloy.
  • Flashlight body is made of C360 Free Machining Brass ( Buttery Smooth )
  • Battery is 10180 Lithium Cell 70mAh
  • The lens has been treated with a AR (Anti-Reflective) coating.
  • Its proprietary circuit design features reverse polarity protection and runs off of one 10180 battery that provides 2 levels of brightness (Low / High).
    • Twist on for Low
    • Twist 1/2 turn more for High

Using a single 10180 battery we got the following results:

  • Low mode, 12 lumens output for up to 6 hours

  • High mode, 145 lumens output for up to 25 minutes

Includes Complete Kit:

1x Lithium Rechargable Battery
1x USB Charging Cable 
1x Charging SS Head With Charge indicator
1x Peanut Light C360 Solid Brass Head & Body
5x Spare O-Rings

EOD Robotics developed this compact breaching tool with input from Bomb Techs, SWAT Operators and Patrol Officers. All these folks need a tool for prying, cutting, pounding, and with extra versatility for shutting off gas valves during emergencies. 

Specifications:

  • Made from 1045 high carbon steel and fully heat treated to a Rockwell hardness of over 45.
  • The EOD Robotics Breacher Bar & CERT Bar come ready to go as a pry bar or lever. Ideal for opening crates and even punching through steel drums etc. The coffin corner back edge lends itself to a hammer nicely.
  • The 2 inner holes in the handle can be for paracord or solid slabs or whatever you like. The hole towards the top of the blade and the one on the end are good for lashing it onto a shaft, tree branch etc. The end hole is geared for hanging it up or for attaching a lanyard so you do not lose it in that pit or in the water.
  • The top edge can be hammered on as can the back end. And then you can use your imagination to do other things with it. (Makes a good wood chisel too!).
  • Bars do not come with cord wrapped handles. You will receive the metal bar. The rest is up to you.
  • Not pretty, but pretty handy. These were bulk packed for shipment to the military so they may have some rub marks where they have rubbed together in transit.
  • Made in USA

Here's What Our Over-Protective Legal Department Has To Say:
Although the EOD Breacher Tool was developed and designed to enter the real world of urban combat, and with a little work with a file, belt sander, grinder, stone or a rock to it could be sharpened and converted to a Deadly stabbing or slashing instrument we can't recommend it. Likewise, the flat on the handle end should not be used as a skull or rib crusher or for performing other blunt trauma. Sorry these are not returnable. Be safe, and don't play with matches or run with scissors.

(US Government Model)

NSN: 3740-01-474-7377 
When Uncle Sam wanted tweezers for tick and splinter removal, these are the ones they chose.

What makes these so special: Most tweezers are made by spot-welding two pieces of metal together, These tweezers are crafted from a single piece of spring tempered stainless steel or spring titanium.The wide hinge area assures perfect alignment, and the points are hand dressed to exacting specifications. The included tip protector also provides for easy carrying on your key ring or hanging next to your dog tags.

Countless Other Uses:

  • Tick removal, home, garden, kitchen, bath, shop, auto, boat, tool box, first aid, hobbies, arts & crafts, fishing, sewing, needlework, removing stitches, hair removal, cosmetics, desk, school, office, pocket/purse, laboratory & medical instrument, splinter & sliver removal

Stainless Steel and Black Passivated Stainless Steel:

Most tweezers are made by spot-welding two pieces of metal together, These tweezers are crafted from a single piece of spring tempered stainless steel. 

Specs:

  • 2.5" x 0.5" x 0.25"
  • (6.3 cm x 13 cm x 6 cm)

This item has a bit of mystery around it. The original government use for it is unknown. Keep one in your car, home and work.  Brand new, never used, overrun from government contract.

What will you use your A/B Cache for?

Possible uses include:

  • Geo-Caching
  • Pet Identification
  • Emergency Cash Stash
  • Water Purification Tablets
  • Pill Storage.
  • Jacket Zipper Pull

Specification Brass:

  • C360 Free Machining Brass ( Buttery Smooth )
  • Overall Length: 56.5mm or 2.225"
  • External Diameter: 16mm or .63"
  • Internal Opening: 11.4mm or .45"
  • Internal Depth Side A : 16mm or .63"
  • Internal Depth Side B : 18mm or .71"
  • Weight 1.7 ounces or 49 Grams
  • Lid is secured via flange to cap seal (Internal o-ring)
  • U.S. Made

Use responsibly and due to the nature of this item, it is not returnable for obvious sanitation reasons.

Always wash your container with hot water and mild soap for ensured sanitation.

Weight0.1700971386 kg0.103475759315 kg0.009922333085 kg0.2267961848 kg0.0283495231 kg0.0850485693 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.1700971386 kg
upc

Weight 0.103475759315 kg
upc

Weight 0.009922333085 kg
upc

Weight 0.2267961848 kg
upc

Weight 0.0283495231 kg
upc

Weight 0.0850485693 kg
upc

You're viewing: EOD Robotics Breacher Bar & CERT Bar – Mid Breacher ( Compact ) $34.99
Add to cart
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Shopping cart close